PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MILR15624 CL1 3 6"W X 60"L X.12
MILR15624 CL1 3 6"W X 60"L X.12 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MILR15624 CL1 3 6"W X 60"L X.12 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-373-0422, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MILR15624 CL1 3 6"W X 60"L X.12
NSN: 5330-01-373-0422
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
Part NumberMILR15624 CL1 3 6"W X 60"L X.12
NSN5330-01-373-0422
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MILR15624 CL1 3 6"W X 60"L X.12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
HARDNESS RATING: 50.0 ROCKWELL C MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER OVERALL
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
OVERALL LENGTH60.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH36.000 INCHES NOMINAL IN
HARDNESS RATING50.0 ROCKWELL C MAXIMUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
DF6503-175 NO. 74Interchangeable
interchangeable cross-reference
interchangeable
MIL-R-15624 CL1Interchangeable
interchangeable cross-reference
interchangeable
211046362Interchangeable
interchangeable cross-reference
interchangeable
MIL-R-15624 CL- 1 36IN W X .062Interchangeable
interchangeable cross-reference
interchangeable
MIL-PRF-15624CL136X60X.0625Interchangeable
interchangeable cross-reference
interchangeable
MIL-R-15624 CL- 1 30 X 60 X .12Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MILR15624 CL1 3 6"W X 60"L X.12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MILR15624 CL1 3 6"W X 60"L X.12?
MILR15624 CL1 3 6"W X 60"L X.12 is a MILR15624 CL1 3 6"W X 60"L X.12.
What parts can replace MILR15624 CL1 3 6"W X 60"L X.12?
There are 9 known substitutes for MILR15624 CL1 3 6"W X 60"L X.12: DF6503-175 NO. 74, MIL-R-15624 CL1, 211046362 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MILR15624 CL1 3 6"W X 60"L X.12?
MILR15624 CL1 3 6"W X 60"L X.12 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-373-0422. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MILR15624 CL1 3 6"W X 60"L X.12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026