PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MILP17577TYPE1SYMB0L1103
MILP17577TYPE1SYMB0L1103 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING MATERIAL is a the manufacturer industrial component. Key specifications include material: ASBESTOS, fabrication_method: BRAIDED, cross-sectional_width: 0.250 INCHES NOMINAL IN, cross-sectional_height: 0.250 INCHES NOMINAL IN, cross-sectional_shape_style: SQUARE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-579-6514, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MILP17577TYPE1SYMB0L1103
NSN: 5330-00-579-6514
FSC: 5330
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialASBESTOS
fabrication_methodBRAIDED
cross-sectional_width0.250 INCHES NOMINAL IN
cross-sectional_height0.250 INCHES NOMINAL IN
cross-sectional_shape_styleSQUARE
NSN5330-00-579-6514
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MILP17577TYPE1SYMB0L1103 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL WIDTH: 0.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.250 INCHES NOMINAL IN
•
MATERIAL: ASBESTOS
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
•
FABRICATION METHOD: BRAIDED
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL WIDTH0.250 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.250 INCHES NOMINAL IN
MATERIALASBESTOS
CROSS-SECTIONAL SHAPE STYLESQUARE
FABRICATION METHODBRAIDED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
M24377-03Interchangeable
interchangeable cross-reference
interchangeable
HHP34TYPE1Interchangeable
interchangeable cross-reference
interchangeable
41888-0016Interchangeable
interchangeable cross-reference
interchangeable
863Interchangeable
interchangeable cross-reference
interchangeable
M24377-05Interchangeable
interchangeable cross-reference
interchangeable
MILP24377Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MILP17577TYPE1SYMB0L1103?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MILP17577TYPE1SYMB0L1103?
MILP17577TYPE1SYMB0L1103 is a PACKING MATERIAL.
What parts can replace MILP17577TYPE1SYMB0L1103?
There are 6 known substitutes for MILP17577TYPE1SYMB0L1103: M24377-03, HHP34TYPE1, 41888-0016 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MILP17577TYPE1SYMB0L1103?
MILP17577TYPE1SYMB0L1103 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-579-6514. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MILP17577TYPE1SYMB0L1103

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026