PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MILP16404
MILP16404 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING MATERIAL is a the manufacturer industrial component. Key specifications include material: ASBESTOS, fabrication_method: TWISTED, cross-sectional_shape_style: CIRCULAR, nondefinitive_spec/std_data: 3 TYPE AND A GRADE AND 3 CLASS, cross_section_outside_diameter: 0.188 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-576-9308, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MILP16404
NSN: 5330-00-576-9308
FSC: 5330
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialASBESTOS
fabrication_methodTWISTED
cross-sectional_shape_styleCIRCULAR
nondefinitive_spec/std_data3 TYPE AND A GRADE AND 3 CLASS
cross_section_outside_diameter0.188 INCHES NOMINAL IN
NSN5330-00-576-9308
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MILP16404 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: CIRCULAR
•
CROSS SECTION OUTSIDE DIAMETER: 0.093 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND A GRADE AND 4 CLASS
•
MATERIAL: ASBESTOS
•
FABRICATION METHOD: TWISTED
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLECIRCULAR
CROSS SECTION OUTSIDE DIAMETER0.093 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA3 TYPE AND A GRADE AND 4 CLASS
MATERIALASBESTOS
FABRICATION METHODTWISTED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
SP64542Interchangeable
interchangeable cross-reference
interchangeable
28G7Interchangeable
interchangeable cross-reference
interchangeable
MILP16404Interchangeable
interchangeable cross-reference
interchangeable
SP64541Interchangeable
interchangeable cross-reference
interchangeable
SP 64543Interchangeable
interchangeable cross-reference
interchangeable
64543Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MILP16404?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MILP16404?
MILP16404 is a PACKING MATERIAL.
What parts can replace MILP16404?
There are 6 known substitutes for MILP16404: SP64542, 28G7, MILP16404 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MILP16404?
MILP16404 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-576-9308. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MILP16404

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026