PartsTable
Technical Data Sheet
PartsTable / MRO / MILI38526-1
MILI38526-1 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The MILI38526-1 is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON OVERALL, overall_width: 1.250 INCHES NOMINAL IN, overall_height: 0.005 INCHES NOMINAL IN, overall_length: 1.730 INCHES NOMINAL IN, style_designator: FLAT, DIAMOND, fifth_hole_spacing: 0.215 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-264-4970, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ MILI38526-1
NSN: 5999-00-264-4970
FSC: 5999
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON OVERALL
overall_width1.250 INCHES NOMINAL IN
overall_height0.005 INCHES NOMINAL IN
overall_length1.730 INCHES NOMINAL IN
style_designatorFLAT, DIAMOND
fifth_hole_spacing0.215 INCHES NOMINAL IN
first_hole_spacing0.271 INCHES NOMINAL IN
third_hole_spacing1.187 INCHES NOMINAL IN
first_hole_diameter0.140 INCHES NOMINAL IN
fourth_hole_spacing0.430 INCHES NOMINAL IN
second_hole_spacing0.593 INCHES NOMINAL IN
second_hole_diameter0.062 INCHES NOMINAL IN
NSN5999-00-264-4970
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN MILI38526-1 MFR MILI38526-1
KEY FEATURES
•
MOUNTING FACILITY TYPE AND QUANTITY: 2 UNTHREADED HOLE(S) FIRST MOUNTING FACILITY
•
UNTHREADED MOUNTING HOLE DIAMETER: 0.062 INCHES NOMINAL FIRST MOUNTING FACILITY IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON
•
TEST DATA DOCUMENT: 81349-MIL-M-38527 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-M-38527 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH1.000 INCHES NOMINAL IN
MOUNTING FACILITY TYPE AND QUANTITY2 UNTHREADED HOLE(S) FIRST MOUNTING FACILITY
MOUNTING FACILITY TYPE AND QUANTITY2 UNTHREADED HOLE(S) SECOND MOUNTING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER0.062 INCHES NOMINAL FIRST MOUNTING FACILITY IN
MATERIALPLASTIC POLYAMIDE NYLON
TEST DATA DOCUMENT81349-MIL-M-38527 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
UNTHREADED MOUNTING HOLE DIAMETER0.140 INCHES NOMINAL SECOND MOUNTING FACILITY IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-38527 MIL SPEC SINGLE MATERIAL RESPONSE
SPECIFICATION/STANDARD DATA81349-MIL-M-38527/8 GOVERNMENT SPECIFICATION
OVERALL LENGTH1.440 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
3180099-18Interchangeable
interchangeable cross-reference
interchangeable
43-02-10Interchangeable
interchangeable cross-reference
interchangeable
MIL-I-38526/1Interchangeable
interchangeable cross-reference
interchangeable
M38526/1-038Interchangeable
interchangeable cross-reference
interchangeable
M38526/1-104Interchangeable
interchangeable cross-reference
interchangeable
M38526-1-020Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy MILI38526-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MILI38526-1?
MILI38526-1 is a MILI38526-1. It is classified as a MRO (MRO_GENERAL).
What parts can replace MILI38526-1?
There are 22 known substitutes for MILI38526-1: 3180099-18, 43-02-10, MIL-I-38526/1 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MILI38526-1?
MILI38526-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-264-4970. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MILI38526-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026