PartsTable
Technical Data Sheet
MILH3780SETG ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

HANGER AND TRACK SET,HORIZONTAL. Key specifications include end_item_name: FOR 300 LB MIN DOOR LBS, component_quantity: 19. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-494-2034, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MILH3780SETG
NSN: 5340-00-494-2034
FSC: 5340
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
end_item_nameFOR 300 LB MIN DOOR LBS
component_quantity19
NSN5340-00-494-2034
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MILH3780SETG MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
NONSUPPLY ITEMS AND QUANTITIES: BOW HANDLE 1 AND BUMPER SHOES 4 AND CENTER TRACK BRACKETS 5 AND END STOP 2 AND END TRACK BRACKETS 2 AND FLUSH PULL 1 AND GUIDE ROLL STRIP 1 AND SLIDING DOOR TRACK 1 AND TROLLEY DOOR HANGER 1 AND CHPE STRIP 1
END ITEM NAME: FOR 300 LB MIN DOOR LBS
COMPONENT QUANTITY: 19
TECHNICAL CHARACTERISTICS (FLIS)
NONSUPPLY ITEMS AND QUANTITIESBOW HANDLE 1 AND BUMPER SHOES 4 AND CENTER TRACK BRACKETS 5 AND END STOP 2 AND END TRACK BRACKETS 2 AND FLUSH PULL 1 AND GUIDE ROLL STRIP 1 AND SLIDING DOOR TRACK 1 AND TROLLEY DOOR HANGER 1 AND CHPE STRIP 1
END ITEM NAMEFOR 300 LB MIN DOOR LBS
COMPONENT QUANTITY19
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
GT800E1Interchangeable
interchangeable cross-reference
interchangeable
CP160-2043-2-041Interchangeable
interchangeable cross-reference
interchangeable
2043-2Interchangeable
interchangeable cross-reference
interchangeable
102012Interchangeable
interchangeable cross-reference
interchangeable
5020BInterchangeable
interchangeable cross-reference
interchangeable
1218867-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MILH3780SETG?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MILH3780SETG?
MILH3780SETG is a HANGER AND TRACK SET,HORIZONTAL.
What parts can replace MILH3780SETG?
There are 14 known substitutes for MILH3780SETG: GT800E1, CP160-2043-2-041, 2043-2 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MILH3780SETG?
MILH3780SETG is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-494-2034. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MILH3780SETG