PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MILE1AMEND2
MILE1AMEND2 ✓ Verified by PartsTable
— · SFP TRANSCEIVER
WHAT YOU NEED TO KNOW
SR = Short Range (multimode, 300m) | LR = Long Range (single-mode, 10km) DOM = Digital Optical Monitoring — most enterprise SFPs support it
MATCH ALL THREE: Speed + Wavelength + Brand compatibility
PRODUCT OVERVIEW

The SEMICONDUCTOR DEVICE,DIODE is a the manufacturer industrial component. Key specifications include material: SILICON SEMICONDUCTOR, overall_length: 0.405 INCHES MAXIMUM IN, mounting_method: THREADED STUD(S), overall_diameter: 0.424 INCHES MAXIMUM IN, nominal_thread_size: 0.190 INCHES IN, thread_series_designator: UNF. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-785-6016, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MILE1AMEND2
NSN: 5961-00-785-6016
FSC: 5961
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSILICON SEMICONDUCTOR
overall_length0.405 INCHES MAXIMUM IN
mounting_methodTHREADED STUD(S)
overall_diameter0.424 INCHES MAXIMUM IN
nominal_thread_size0.190 INCHES IN
thread_series_designatorUNF
mounting_facility_quantity1
overall_width_across_flats0.424 INCHES MINIMUM AND 0.443 INCHES MAXIMUM IN
terminal_type_and_quantity1 TAB, SOLDER LUG AND 1 THREADED STUD
specification/standard_data81349-MIL-E-1/1108 GOVERNMENT SPECIFICATION
current_rating_per_characteristic12.00 AMPERES MAXIMUM AVERAGE FORWARD CURRENT AVERAGED OVER A FULL 60-HZ CYCLE
maximum_operating_temp_per_measurement_point150.0 CELSIUS AMBIENT AIR DEGC
NSN5961-00-785-6016
COMPONENT DIAGRAM
BAIL LATCH 10G SFP+ 850nm · SR (MMF, 300m) DOM: Digital Optical Monitoring TX RX LC DUPLEX 20-PIN EDGE CONNECTOR ~56.5 mm ~13.4mm SFP+ TRANSCEIVER | 10G | 850nm | SR (MMF, 300m) Hot-swappable | LC duplex fiber | DDM/DOM supported TITLE SFP+ XCVR PN MILE1AMEND2 MFR OEM SEMICONDUCTOR DEVICE,DIODE
KEY FEATURES
•
SPECIFICATION/STANDARD DATA: 81349-MIL-E-1/1108 GOVERNMENT SPECIFICATION
•
CURRENT RATING PER CHARACTERISTIC: 12.00 AMPERES MAXIMUM AVERAGE FORWARD CURRENT AVERAGED OVER A FULL 60-HZ CYCLE
•
MOUNTING FACILITY QUANTITY: 1
•
OVERALL WIDTH ACROSS FLATS: 0.424 INCHES MINIMUM AND 0.443 INCHES MAXIMUM IN
•
OVERALL DIAMETER: 0.424 INCHES MAXIMUM IN
•
MOUNTING METHOD: THREADED STUD(S)
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIFICATION/STANDARD DATA81349-MIL-E-1/1108 GOVERNMENT SPECIFICATION
CURRENT RATING PER CHARACTERISTIC12.00 AMPERES MAXIMUM AVERAGE FORWARD CURRENT AVERAGED OVER A FULL 60-HZ CYCLE
MOUNTING FACILITY QUANTITY1
OVERALL LENGTH0.405 INCHES MAXIMUM IN
OVERALL WIDTH ACROSS FLATS0.424 INCHES MINIMUM AND 0.443 INCHES MAXIMUM IN
OVERALL DIAMETER0.424 INCHES MAXIMUM IN
MOUNTING METHODTHREADED STUD(S)
NOMINAL THREAD SIZE0.190 INCHES IN
MAXIMUM OPERATING TEMP PER MEASUREMENT POINT150.0 CELSIUS AMBIENT AIR DEGC
THREAD SERIES DESIGNATORUNF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
1N1202Interchangeable
interchangeable cross-reference
interchangeable
1N1200RInterchangeable
interchangeable cross-reference
interchangeable
AG1012RInterchangeable
interchangeable cross-reference
interchangeable
1N1200RAInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy MILE1AMEND2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MILE1AMEND2?
MILE1AMEND2 is a SEMICONDUCTOR DEVICE,DIODE.
What parts can replace MILE1AMEND2?
There are 4 known substitutes for MILE1AMEND2: 1N1202, 1N1200R, AG1012R and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MILE1AMEND2?
MILE1AMEND2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-785-6016. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MILE1AMEND2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026