MILC8063TYPE1CLASSA — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

MILC8063TYPE1CLASSA: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.173 INCHES NOMINAL IN, material: ALUMINUM BAND, overall_width: 0.375 INCHES NOMINAL IN, special_features: EXTRUDED SYNTHETIC CHANNEL COVERED, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-186-3390, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MILC8063TYPE1CLASSA

NSN: 5340-00-186-3390
NIINs: 001863390, 002989497
FSC: 5340 — Hardware, Commercial
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

diameter	0.173 INCHES NOMINAL IN
material	ALUMINUM BAND
overall_width	0.375 INCHES NOMINAL IN
special_features	EXTRUDED SYNTHETIC CHANNEL COVERED
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.032 INCHES NOMINAL IN
loop_inside_diameter	0.125 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end	0.4525 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.2655 INCHES NOMINAL IN
NSN	5340-00-186-3390

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: SINGLE LOOP

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.204 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.748 INCHES NOMINAL IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.560 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.204 INCHES NOMINAL IN
OVERALL WIDTH	0.500 INCHES NOMINAL IN
MATERIAL THICKNESS	0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.748 INCHES NOMINAL IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.560 INCHES NOMINAL IN
MATERIAL	ALUMINUM ALLOY 2024 BAND
LOOP INSIDE DIAMETER	0.438 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 4

414B638P1Reference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-DTL-8603Reference document

Same NSN cross-reference

Reference document — Identification reference

AN742D7Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

755-7Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy MILC8063TYPE1CLASSA?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MILC8063TYPE1CLASSA?

MILC8063TYPE1CLASSA is a CLAMP,LOOP.

What parts can replace MILC8063TYPE1CLASSA?

There are 4 known substitutes for MILC8063TYPE1CLASSA: 414B638P1, MIL-DTL-8603, AN742D7 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MILC8063TYPE1CLASSA?

MILC8063TYPE1CLASSA is cataloged in the U.S. Government catalog under NSN 5340-00-186-3390. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MILC8063TYPE1CLASSA — CLAMP,LOOP

Request a Quote — MILC8063TYPE1CLASSA