PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MILB8942
MILB8942 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BEARING,PLAIN,SELF-ALIGNING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C INNER MEMBER, bore_diameter: 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN, hardness_rating: 55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER, style_designator: WITH INSERT AND/OR LINER WITH STAKING GROOVE, inner_member_width: 1.3730 INCHES MINIMUM AND 1.3750 INCHES MAXIMUM IN, outer_member_width: 1.0000 INCHES MINIMUM AND 1.0100 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-079-9974, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MILB8942
NSN: 3120-00-079-9974
FSC: 3120
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 440C INNER MEMBER
bore_diameter0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
hardness_rating55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER
style_designatorWITH INSERT AND/OR LINER WITH STAKING GROOVE
inner_member_width1.3730 INCHES MINIMUM AND 1.3750 INCHES MAXIMUM IN
outer_member_width1.0000 INCHES MINIMUM AND 1.0100 INCHES MAXIMUM IN
outer_member_outside_diameter2.1245 INCHES MINIMUM AND 2.1250 INCHES MAXIMUM IN
material_document_and_classificationAMS 5630 ASSN STD SINGLE MATERIAL RESPONSE INNER MEMBER
NSN3120-00-079-9974
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: MILB8942 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
•
OUTER MEMBER OUTSIDE DIAMETER: 0.6870 INCHES MINIMUM AND 0.6875 INCHES MAXIMUM IN
•
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM OUTER RACE MEMBER
•
MATERIAL: STEEL COMP 440C INNER MEMBER
•
STYLE DESIGNATOR: WITHOUT INSERT OR LINER
•
OUTER MEMBER WIDTH: 0.3120 INCHES MINIMUM AND 0.3220 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM IN
OUTER MEMBER OUTSIDE DIAMETER0.6870 INCHES MINIMUM AND 0.6875 INCHES MAXIMUM IN
HARDNESS RATING23.0 ROCKWELL C MINIMUM OUTER RACE MEMBER
MATERIALSTEEL COMP 440C INNER MEMBER
STYLE DESIGNATORWITHOUT INSERT OR LINER
HARDNESS RATING55.0 ROCKWELL C MINIMUM INNER MEMBER
MATERIALSTEEL OUTER RACE MEMBER
OUTER MEMBER WIDTH0.3120 INCHES MINIMUM AND 0.3220 INCHES MAXIMUM IN
INNER MEMBER WIDTH0.4350 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
STATIC RADIAL LOAD RATING9400 POUNDS LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
3120PL0685683Interchangeable
interchangeable cross-reference
interchangeable
AS14102Interchangeable
interchangeable cross-reference
interchangeable
MS14102-5Interchangeable
interchangeable cross-reference
interchangeable
AS21230Interchangeable
interchangeable cross-reference
interchangeable
MS21230-16Interchangeable
interchangeable cross-reference
interchangeable
MS21231-5Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MILB8942?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MILB8942?
MILB8942 is a BEARING,PLAIN,SELF-ALIGNING.
What parts can replace MILB8942?
There are 6 known substitutes for MILB8942: 3120PL0685683, AS14102, MS14102-5 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MILB8942?
MILB8942 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-079-9974. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MILB8942

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026