PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-STD-130H
MIL-STD-130H ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The CAM ASSEMBLY,PILOT VALVE is a the manufacturer industrial component. Key specifications include end_item_identification: AIRCRAFT MODEL A-6. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-078-3506, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-STD-130H
NSN: 3120-00-078-3506
FSC: 3120
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
end_item_identificationAIRCRAFT MODEL A-6
general_characteristics_item_descriptionSTEEL,MIL-S-6758,COMP E4130,COND D4; PRIMER,MIL-P-8585; 1.250 IN. OD; 0.200 IN. H; 0.257 IN. THRU HOLE DIA,COUNTERSINK 0.500 IN. DIA; 0.742 IN. MIN AND 0.745 IN. MAX DIA,RAISED PART IN
NSN3120-00-078-3506
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: MIL-STD-130H · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 630 OVERALL
•
CORNER SHAPE: SQUARE ALL CORNERS
•
BODY INSIDE DIAMETER: 0.3120 INCHES MINIMUM AND 0.3135 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
BODY OUTSIDE DIAMETER: 0.4330 INCHES MINIMUM AND 0.4350 INCHES MAXIMUM IN
•
TEST DATA DOCUMENT: 76301-MAC PS21200 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
STYLE DESIGNATOR: SOLID, PLAIN, NO OUTSIDE FLANGES
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 630 OVERALL
CORNER SHAPESQUARE ALL CORNERS
BODY INSIDE DIAMETER0.3120 INCHES MINIMUM AND 0.3135 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
BODY OUTSIDE DIAMETER0.4330 INCHES MINIMUM AND 0.4350 INCHES MAXIMUM IN
OVERALL LENGTH0.9430 INCHES MINIMUM AND 0.9480 INCHES MAXIMUM IN
TEST DATA DOCUMENT76301-MAC PS21200 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
STYLE DESIGNATORSOLID, PLAIN, NO OUTSIDE FLANGES
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
696476CL4Interchangeable
interchangeable cross-reference
interchangeable
696476 REV AInterchangeable
interchangeable cross-reference
interchangeable
MIL-STD-130HInterchangeable
interchangeable cross-reference
interchangeable
578474Interchangeable
interchangeable cross-reference
interchangeable
1285125Interchangeable
interchangeable cross-reference
interchangeable
1285125-115Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-STD-130H?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-STD-130H?
MIL-STD-130H is a CAM ASSEMBLY,PILOT VALVE.
What parts can replace MIL-STD-130H?
There are 17 known substitutes for MIL-STD-130H: 696476CL4, 696476 REV A, MIL-STD-130H and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-STD-130H?
MIL-STD-130H is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-078-3506. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-STD-130H

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026