PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-S-20708/2
MIL-S-20708/2 ✓ Verified by PartsTable
— · COMPONENT
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

The MIL-S-20708/2 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5990-00-206-3753, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-S-20708/2
NSN: 5990-00-206-3753
FSC: 5990
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberMIL-S-20708/2
NSN5990-00-206-3753
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available MIL-S-20708/2 TITLE COMPONENT PN MIL-S-20708/2 MFR MIL-S-20708/2
KEY FEATURES
•
SHAFT SLOT WIDTH: 0.0200 INCHES NOMINAL SINGLE SHAFT IN
•
TRANSFORMATION RATIO: 0.783 ROTOR TO STATOR NOMINAL
•
UNDERCUT WIDTH: 0.0620 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.9750 INCHES NOMINAL IN
•
FLANGE DIAMETER: 1.0570 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM IN
•
SHOULDER DIAMETER: 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
•
FLANGE THICKNESS: 0.0930 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SHAFT SLOT WIDTH0.0200 INCHES NOMINAL SINGLE SHAFT IN
TRANSFORMATION RATIO0.783 ROTOR TO STATOR NOMINAL
UNDERCUT WIDTH0.0620 INCHES NOMINAL IN
OVERALL LENGTH2.3360 INCHES MINIMUM AND 2.3760 INCHES MAXIMUM IN
UNDERCUT DIAMETER0.9750 INCHES NOMINAL IN
FLANGE DIAMETER1.0570 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM IN
SHOULDER DIAMETER0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
FLANGE THICKNESS0.0930 INCHES NOMINAL IN
PILOT DIAMETER0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
BODY STYLESTANDARD ROUND C
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
MIL-S-20708/2Interchangeable
interchangeable cross-reference
interchangeable
CR40913002Interchangeable
interchangeable cross-reference
interchangeable
AS20708/2Interchangeable
interchangeable cross-reference
interchangeable
MILS20708-2Interchangeable
interchangeable cross-reference
interchangeable
15CT6BInterchangeable
interchangeable cross-reference
interchangeable
030313BL27Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-S-20708/2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-S-20708/2?
MIL-S-20708/2 is a MIL-S-20708/2.
What parts can replace MIL-S-20708/2?
There are 25 known substitutes for MIL-S-20708/2: MIL-S-20708/2, CR40913002, AS20708/2 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-S-20708/2?
MIL-S-20708/2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5990-00-206-3753. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-S-20708/2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026