PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-S-19622/16

MIL-S-19622/16 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING ASSEMBLY is a the manufacturer industrial component. Key specifications include outside_diameter: 0.350 INCHES NOMINAL IN, special_features: FURNISHED ITEMS: O-RING; MATERIAL: PLASTIC OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-202-2580, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-S-19622/16
NSN: 5330-00-202-2580
FSC: 5330
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
outside_diameter0.350 INCHES NOMINAL IN
special_featuresFURNISHED ITEMS: O-RING; MATERIAL: PLASTIC OVERALL
NSN5330-00-202-2580
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MIL-S-19622/16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6855,GR 40 MIL SPEC 2ND MATERIAL RESPONSE INTERMEDIATE RING
•
MATERIAL: PLASTIC POLYAMIDE NYLON TOP RING
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR AND ANGLE INTERMEDIATE RING
•
HEIGHT: 0.937 INCHES NOMINAL IN
•
INTERMEDIATE RING QUANTITY: 2
•
FSC APPLICATION DATA: ELECTRICAL HARDWARE SUPPLIES
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6855,GR 40 MIL SPEC 2ND MATERIAL RESPONSE INTERMEDIATE RING
MATERIALPLASTIC POLYAMIDE NYLON TOP RING
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR AND ANGLE INTERMEDIATE RING
HEIGHT0.937 INCHES NOMINAL IN
INTERMEDIATE RING QUANTITY2
MATERIALPLASTIC POLYAMIDE NYLON AND RUBBER CHLOROPRENE CLASS CR INTERMEDIATE RING
FSC APPLICATION DATAELECTRICAL HARDWARE SUPPLIES
MATERIALPLASTIC POLYAMIDE NYLON BOTTOM RING
INSIDE DIAMETER0.187 INCHES NOMINAL IN
OUTSIDE DIAMETER0.687 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
106Interchangeable
interchangeable cross-reference
interchangeable
M19622/16-0002Interchangeable
interchangeable cross-reference
interchangeable
M19622/16-0003Interchangeable
interchangeable cross-reference
interchangeable
5330PL1204621Interchangeable
interchangeable cross-reference
interchangeable
M19622/16-0004Interchangeable
interchangeable cross-reference
interchangeable
W130800-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-S-19622/16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-S-19622/16?
MIL-S-19622/16 is a PACKING ASSEMBLY.
What parts can replace MIL-S-19622/16?
There are 20 known substitutes for MIL-S-19622/16: 106, M19622/16-0002, M19622/16-0003 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-S-19622/16?
MIL-S-19622/16 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-202-2580. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-S-19622/16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026