PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-S-19500/76
MIL-S-19500/76 ✓ Verified by PartsTable
— · SFP TRANSCEIVER
WHAT YOU NEED TO KNOW
SR = Short Range (multimode, 300m) | LR = Long Range (single-mode, 10km) DOM = Digital Optical Monitoring — most enterprise SFPs support it
MATCH ALL THREE: Speed + Wavelength + Brand compatibility
PRODUCT OVERVIEW

The MIL-S-19500/76 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-853-6454, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-S-19500/76
NSN: 5961-00-853-6454
FSC: 5961
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberMIL-S-19500/76
NSN5961-00-853-6454
COMPONENT DIAGRAM
BAIL LATCH 10G SFP+ 850nm · SR (MMF, 300m) DOM: Digital Optical Monitoring TX RX LC DUPLEX 20-PIN EDGE CONNECTOR ~56.5 mm ~13.4mm SFP+ TRANSCEIVER | 10G | 850nm | SR (MMF, 300m) Hot-swappable | LC duplex fiber | DDM/DOM supported TITLE SFP+ XCVR PN MIL-S-19500/76 MFR OEM MIL-S-19500/76
KEY FEATURES
•
SPECIFICATION/STANDARD DATA: 81349-MIL-S-19500/76 GOVERNMENT SPECIFICATION
•
MAXIMUM OPERATING TEMP PER MEASUREMENT POINT: 100.0 CELSIUS JUNCTION DEGC
•
OVERALL DIAMETER: 1.250 INCHES MAXIMUM IN
•
TERMINAL TYPE AND QUANTITY: 2 PIN AND 1 THREADED STUD
•
MOUNTING METHOD: THREADED STUD(S)
•
SEMICONDUCTOR MATERIAL: GERMANIUM
TECHNICAL CHARACTERISTICS (FLIS)
SPECIFICATION/STANDARD DATA81349-MIL-S-19500/76 GOVERNMENT SPECIFICATION
MAXIMUM OPERATING TEMP PER MEASUREMENT POINT100.0 CELSIUS JUNCTION DEGC
OVERALL DIAMETER1.250 INCHES MAXIMUM IN
TERMINAL TYPE AND QUANTITY2 PIN AND 1 THREADED STUD
OVERALL LENGTH1.130 INCHES MAXIMUM IN
MOUNTING METHODTHREADED STUD(S)
SEMICONDUCTOR MATERIALGERMANIUM
SPECIAL FEATURESJUNCTION PATTERN ARRANGEMENT: PNP
TEST DATA DOCUMENT81349-MIL-S-19500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MOUNTING FACILITY QUANTITY1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
5961009267397Interchangeable
interchangeable cross-reference
interchangeable
5961PL1279221Interchangeable
interchangeable cross-reference
interchangeable
DMS 90155BInterchangeable
interchangeable cross-reference
interchangeable
JAN2N1412Interchangeable
Same NIIN cross-reference
interchangeable
4192800-095Interchangeable
Same NIIN cross-reference
interchangeable
4192800-95Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy MIL-S-19500/76?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-S-19500/76?
MIL-S-19500/76 is a MIL-S-19500/76.
What parts can replace MIL-S-19500/76?
There are 7 known substitutes for MIL-S-19500/76: 5961009267397, 5961PL1279221, DMS 90155B and 4 more. Substitute compatibility should be verified for your specific system.
Is MIL-S-19500/76 still available?
MIL-S-19500/76 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-S-19500/76

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026