PartsTable
Technical Data Sheet

MIL-S-19500/455 — TRANSISTOR

✓ Government record, cited
— · SFP TRANSCEIVER
PRODUCT OVERVIEW

MIL-S-19500/455: TRANSISTOR.

The TRANSISTOR is a the manufacturer industrial component. Key specifications include overall_width: 0.700 INCHES MAXIMUM IN, overall_height: 0.340 INCHES MAXIMUM IN, overall_length: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, mounting_method: TERMINAL, terminal_length: 1.500 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN, overall_diameter: 0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5961-00-594-2760, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-S-19500/455
NSN: 5961-00-594-2760
NIINs: 005942760, 010231681, 010659372, 012241848
FSC: 5961 — Semiconductor Devices and Associated Hardware
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
overall_width0.700 INCHES MAXIMUM IN
overall_height0.340 INCHES MAXIMUM IN
overall_length0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
mounting_methodTERMINAL
terminal_length1.500 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
overall_diameter0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN
special_featuresJUNCTION PATTERN ARRANGEMENT: NPN
features_providedHERMETICALLY SEALED CASE
internal_configurationJUNCTION CONTACT
semiconductor_materialSILICON
terminal_circle_diameter0.200 INCHES NOMINAL IN
mounting_facility_quantity2
NSN5961-00-594-2760
COMPONENT DIAGRAM
BAIL LATCH 10G SFP+ 850nm · SR (MMF, 300m) DOM: Digital Optical Monitoring TX RX LC DUPLEX 20-PIN EDGE CONNECTOR ~56.5 mm ~13.4mm SFP+ TRANSCEIVER | 10G | 850nm | SR (MMF, 300m) Hot-swappable | LC duplex fiber | DDM/DOM supported TITLE SFP+ XCVR PN MIL-S-19500/455 MFR OEM TRANSISTOR
KEY FEATURES
•
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC: 250.0 MAXIMUM COLLECTOR TO BASE VOLTAGE/STATIC/EMITTER OPEN AND 200.0 MAXIMUM COLLECTOR TO EMITTER VOLTAGE/STATIC/BASE OPEN AND 6.0 MAXIMUM EMITTER TO BASE VOLTAGE, STATIC, COLLECTOR OPEN
•
MAXIMUM OPERATING TEMP PER MEASUREMENT POINT: 200.0 CELSIUS AMBIENT AIR DEGC
•
OVERALL DIAMETER: 0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN
•
TERMINAL LENGTH: 1.500 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
•
MOUNTING METHOD: TERMINAL
•
SEMICONDUCTOR MATERIAL: SILICON
•
INTERNAL CONFIGURATION: JUNCTION CONTACT
TECHNICAL CHARACTERISTICS
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC250.0 MAXIMUM COLLECTOR TO BASE VOLTAGE/STATIC/EMITTER OPEN AND 200.0 MAXIMUM COLLECTOR TO EMITTER VOLTAGE/STATIC/BASE OPEN AND 6.0 MAXIMUM EMITTER TO BASE VOLTAGE, STATIC, COLLECTOR OPEN
MAXIMUM OPERATING TEMP PER MEASUREMENT POINT200.0 CELSIUS AMBIENT AIR DEGC
OVERALL DIAMETER0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN
TERMINAL LENGTH1.500 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
MOUNTING METHODTERMINAL
SEMICONDUCTOR MATERIALSILICON
OVERALL LENGTH0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
INTERNAL CONFIGURATIONJUNCTION CONTACT
FEATURES PROVIDEDHERMETICALLY SEALED CASE
CURRENT RATING PER CHARACTERISTIC1.00 AMPERES MAXIMUM BASE CURRENT, DC AND 5.00 AMPERES MAXIMUM COLLECTOR CURRENT, DC
SUBSTITUTES & CROSS-REFERENCES 3
MIL-PRF-19500/455Reference document
Same NSN cross-reference
Reference document — Identification reference
JAN2N5666AReference document
Same NSN cross-reference
Reference document — Secondary reference
JAN2N5666Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MIL-S-19500/455?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-S-19500/455?
MIL-S-19500/455 is a TRANSISTOR.
What parts can replace MIL-S-19500/455?
There are 3 known substitutes for MIL-S-19500/455: MIL-PRF-19500/455, JAN2N5666A, JAN2N5666. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-S-19500/455?
MIL-S-19500/455 is cataloged in the U.S. Government catalog under NSN 5961-00-594-2760. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-S-19500/455

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.