PartsTable
Technical Data Sheet

MIL-S-19500/274 — CONNECTOR,RECEPTACLE,ELECTRICAL

✓ Government record, cited
— · SFP TRANSCEIVER
PRODUCT OVERVIEW

MIL-S-19500/274: CONNECTOR,RECEPTACLE,ELECTRICAL.

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include overall_height: 0.210 INCHES MAXIMUM IN, overall_length: 0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN, mounting_method: TERMINAL, terminal_length: 1.500 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN, overall_diameter: 0.209 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN, special_features: JUNCTION PATTERN ARRANGEMENT: NPN. This part is cataloged in the U.S.

Government catalog under NSN 5961-00-771-7183, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-S-19500/274
NSN: 5961-00-771-7183
NIINs: 007717183, 009041885, 009501653, 010165396
FSC: 5961 — Semiconductor Devices and Associated Hardware
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
overall_height0.210 INCHES MAXIMUM IN
overall_length0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
mounting_methodTERMINAL
terminal_length1.500 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
overall_diameter0.209 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
special_featuresJUNCTION PATTERN ARRANGEMENT: NPN
features_providedHERMETICALLY SEALED CASE
internal_configurationJUNCTION CONTACT
semiconductor_materialSILICON
terminal_circle_diameter0.100 INCHES NOMINAL IN
terminal_type_and_quantity3 UNINSULATED WIRE LEAD
specification/standard_data81349-MIL-S-19500/274 GOVERNMENT SPECIFICATION
NSN5961-00-771-7183
COMPONENT DIAGRAM
BAIL LATCH 10G SFP+ 850nm · SR (MMF, 300m) DOM: Digital Optical Monitoring TX RX LC DUPLEX 20-PIN EDGE CONNECTOR ~56.5 mm ~13.4mm SFP+ TRANSCEIVER | 10G | 850nm | SR (MMF, 300m) Hot-swappable | LC duplex fiber | DDM/DOM supported TITLE SFP+ XCVR PN MIL-S-19500/274 MFR OEM CONNECTOR,RECEPTACLE,ELECTRICAL
KEY FEATURES
•
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC: 100.0 MAXIMUM BREAKDOWN VOLTAGE, COLLECTOR-TO-BASE, EMITTER OPEN AND 60.0 MAXIMUM BREAKDOWN VOLTAGE, COLLECTOR-TO-EMITTER, BASE OPEN AND 7.0 MAXIMUM EMITTER TO BASE VOLTAGE, STATIC, COLLECTOR OPEN
•
MAXIMUM OPERATING TEMP PER MEASUREMENT POINT: 200.0 CELSIUS JUNCTION DEGC
•
OVERALL DIAMETER: 0.209 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
•
TERMINAL LENGTH: 1.500 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
•
MOUNTING METHOD: TERMINAL
•
SEMICONDUCTOR MATERIAL: SILICON
•
INTERNAL CONFIGURATION: JUNCTION CONTACT
TECHNICAL CHARACTERISTICS
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC100.0 MAXIMUM BREAKDOWN VOLTAGE, COLLECTOR-TO-BASE, EMITTER OPEN AND 60.0 MAXIMUM BREAKDOWN VOLTAGE, COLLECTOR-TO-EMITTER, BASE OPEN AND 7.0 MAXIMUM EMITTER TO BASE VOLTAGE, STATIC, COLLECTOR OPEN
MAXIMUM OPERATING TEMP PER MEASUREMENT POINT200.0 CELSIUS JUNCTION DEGC
OVERALL DIAMETER0.209 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
TERMINAL LENGTH1.500 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
MOUNTING METHODTERMINAL
SEMICONDUCTOR MATERIALSILICON
OVERALL LENGTH0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
INTERNAL CONFIGURATIONJUNCTION CONTACT
FEATURES PROVIDEDHERMETICALLY SEALED CASE
SPECIFICATION/STANDARD DATA81349-MIL-S-19500/274 GOVERNMENT SPECIFICATION
SUBSTITUTES & CROSS-REFERENCES 1
JAN2N911Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MIL-S-19500/274?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-S-19500/274?
MIL-S-19500/274 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace MIL-S-19500/274?
There is 1 known substitute for MIL-S-19500/274: JAN2N911. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-S-19500/274?
MIL-S-19500/274 is cataloged in the U.S. Government catalog under NSN 5961-00-771-7183. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-S-19500/274

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.