MIL-S-15291/7 — Technical Data Sheet

✓ Verified by PartsTable

— · COMPONENT

WHAT YOU NEED TO KNOW

Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel

Confirm exact part number — similar PNs may be different parts

PRODUCT OVERVIEW

The SWITCH,ROTARY is a the manufacturer industrial component. Key specifications include shaft_type: ROUND W/THROUGH HOLE SINGLE ACTUATOR, shaft_length: 0.468 INCHES NOMINAL SINGLE ACTUATOR IN, overall_width: 4.375 INCHES NOMINAL IN, pole_quantity: 6 SINGLE SECTION FRONT, terminal_type: TAB W/SCREW, overall_height: 3.688 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5930-00-258-5483, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MIL-S-15291/7

NSN: 5930-00-258-5483
FSC: 5930
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

shaft_type	ROUND W/THROUGH HOLE SINGLE ACTUATOR
shaft_length	0.468 INCHES NOMINAL SINGLE ACTUATOR IN
overall_width	4.375 INCHES NOMINAL IN
pole_quantity	6 SINGLE SECTION FRONT
terminal_type	TAB W/SCREW
overall_height	3.688 INCHES NOMINAL IN
overall_length	4.812 INCHES NOMINAL IN
shaft_diameter	0.375 INCHES NOMINAL SINGLE ACTUATOR IN
throw_quantity	4 EACH SECTION REAR
mounting_method	BASE AND UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY
overall_diameter	2.750 INCHES NOMINAL IN
special_features	TWO SPACERS BEFORE SECTION ONE AND ONE SPACER AFTER SECTION TWO
NSN	5930-00-258-5483

COMPONENT DIAGRAM

KEY FEATURES

•

UNTHREADED MOUNTING HOLE DIAMETER: 0.314 INCHES MINIMUM AND 0.317 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN

•

CONTACT LOAD CURRENT RATING: 30.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL

•

TEST DATA DOCUMENT: 81349-MIL-S-15291 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

•

TERMINAL TYPE: TAB W/SCREW

•

SPECIFICATION/STANDARD DATA: 81349-MIL-S-15291/7 GOVERNMENT SPECIFICATION

•

CONTACT VOLTAGE RATING IN VOLTS: 500.0 AC AT SEA LEVEL

TECHNICAL CHARACTERISTICS (FLIS)

UNTHREADED MOUNTING HOLE DIAMETER	0.314 INCHES MINIMUM AND 0.317 INCHES MAXIMUM SINGLE MOUNTING FACILITY IN
CONTACT LOAD CURRENT RATING	30.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL
TEST DATA DOCUMENT	81349-MIL-S-15291 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
OVERALL LENGTH	5.187 INCHES NOMINAL IN
TERMINAL TYPE	TAB W/SCREW
SPECIFICATION/STANDARD DATA	81349-MIL-S-15291/7 GOVERNMENT SPECIFICATION
CONTACT VOLTAGE RATING IN VOLTS	500.0 AC AT SEA LEVEL
OVERALL WIDTH	4.375 INCHES NOMINAL IN
SWITCH ACTUATOR POSITIONING INCREMENT	90.0 DEGREES SINGLE ACTUATOR
OVERALL HEIGHT	3.688 INCHES NOMINAL IN

VERIFIED SUBSTITUTES & CROSS-REFERENCES 24

3SR2C4Interchangeable