MIL-S-10215 — CORE,FLEXIBLE SHAFT ASSEMBLY

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

MIL-S-10215: CORE,FLEXIBLE SHAFT ASSEMBLY.

The CORE,FLEXIBLE SHAFT ASSEMBLY is a the manufacturer industrial component. Key specifications include end_type: ROUND KEYED FIRST END, material: IRON, tip_length: 0.750 INCHES NOMINAL FIRST END IN, thread_class: 2B BOTH ENDS, core_diameter: 0.128 INCHES MINIMUM AND 0.152 INCHES MAXIMUM IN, thread_length: 0.375 INCHES NOMINAL BOTH ENDS IN. This part is cataloged in the U.S.

Government catalog under NSN 6680-00-112-0227, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MIL-S-10215

NSN: 6680-00-112-0227
NIINs: 001120227, 002354312, 005079977, 005079978, 005079981, 005079982, 005079984, 005079992, 005079993, 005451782, 006957189, 007320561, 007372728, 007418491, 007527479, 007976738, 007983056, 007983058, 007983213, 007987478, 008252076, 008284394, 008509334, 008690435, 008820960, 008820961, 008820965, 009125636, 009141014, 009441367, 010178565, 010178566, 010178567, 010577087, 010991804, 010996801
FSC: 6680 — Liquid and Gas Flow, Liquid Level, and Mechanical Motion Measuring Instruments
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

end_type	ROUND KEYED FIRST END
material	IRON
tip_length	0.750 INCHES NOMINAL FIRST END IN
thread_class	2B BOTH ENDS
core_diameter	0.128 INCHES MINIMUM AND 0.152 INCHES MAXIMUM IN
thread_length	0.375 INCHES NOMINAL BOTH ENDS IN
coating_method	PLATED CORE
overall_length	108.625 INCHES NOMINAL IN
thread_location	INTERNAL BOTH ENDS
overall_end_size	1.000 IN. HEX BY 0.609 IN. H IN
special_features	90 DEG DRIVE;RPM RATIO OUTPUT/INPUT 0.500;INPUT SHAFT ROTATION W/RESPECT TO OUTPUT SIDE,SAME;L.H.HOUSING TYPE
thread_direction	RIGHT-HAND BOTH ENDS
NSN	6680-00-112-0227

COMPONENT DIAGRAM

KEY FEATURES

•

WIDTH ACROSS FLATS: 0.750 INCHES NOMINAL SECOND END IN

•

CROSS SECTION SIZE AND LOCATION: 0.101 INCHES MINIMUM ACROSS FLATS AND 0.104 INCHES MAXIMUM ACROSS FLATS SECOND END IN

•

CASING PROTECTIVE DEVICE TYPE: PLASTIC COVER OR RUBBER COVER

•

END OVERALL DIAMETER: 0.875 INCHES NOMINAL SECOND END IN

•

THREAD DEPTH: 0.375 INCHES NOMINAL SECOND END IN

TECHNICAL CHARACTERISTICS

WIDTH ACROSS FLATS	0.750 INCHES NOMINAL SECOND END IN
WIDTH ACROSS FLATS	1.000 INCHES NOMINAL FIRST END IN
CROSS SECTION SIZE AND LOCATION	0.101 INCHES MINIMUM ACROSS FLATS AND 0.104 INCHES MAXIMUM ACROSS FLATS SECOND END IN
CROSS SECTION SIZE AND LOCATION	0.150 INCHES MINIMUM DIAMETER AND 0.153 INCHES MAXIMUM DIAMETER FIRST END IN
CASING PROTECTIVE DEVICE TYPE	PLASTIC COVER OR RUBBER COVER
END OVERALL DIAMETER	0.875 INCHES NOMINAL SECOND END IN
END OVERALL DIAMETER	1.188 INCHES NOMINAL FIRST END IN
THREAD DEPTH	0.375 INCHES NOMINAL SECOND END IN
THREAD DEPTH	0.327 INCHES NOMINAL FIRST END IN
OVERALL LENGTH	96.125 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 8

MIL-PRF-10215Reference document

Same NSN cross-reference