PartsTable
Technical Data Sheet

MIL-R-8791/1-007 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MIL-R-8791/1-007: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-PERIPHERAL OVERALL, center_hole_diameter: 0.153 INCHES MINIMUM AND 0.155 INCHES MAXIMUM IN, cross-sectional_height: 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN, cross-sectional_shape_style: SQUARE/RECTANGULAR, material_document_and_classification: MIL-R-8791/1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-387-0550, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-R-8791/1-007
NSN: 5330-01-387-0550
FSC: 5330 — Packing and Gasket Materials
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-PERIPHERAL OVERALL
center_hole_diameter0.153 INCHES MINIMUM AND 0.155 INCHES MAXIMUM IN
cross-sectional_height0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
material_document_and_classificationMIL-R-8791/1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-387-0550
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MIL-R-8791/1-007 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-8791/1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
CENTER HOLE DIAMETER: 0.153 INCHES MINIMUM AND 0.155 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
JOINT TYPE: SCARF-PERIPHERAL OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-8791/1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
CENTER HOLE DIAMETER0.153 INCHES MINIMUM AND 0.155 INCHES MAXIMUM IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
JOINT TYPESCARF-PERIPHERAL OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
M8791/1-007Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS8791/1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
AS8791/1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MIL-R-8791/1-007?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-R-8791/1-007?
MIL-R-8791/1-007 is a RETAINER,PACKING.
What parts can replace MIL-R-8791/1-007?
There are 3 known substitutes for MIL-R-8791/1-007: M8791/1-007, SAE-AS8791/1, AS8791/1. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-R-8791/1-007?
MIL-R-8791/1-007 is cataloged in the U.S. Government catalog under NSN 5330-01-387-0550. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-R-8791/1-007