MIL-R-83248/2-229 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

MIL-R-83248/2-229: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, special_features: OXYGEN CLEAN, center_hole_diameter: 2.339 INCHES MINIMUM AND 2.379 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, departure_from_cited_document: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-476-4295, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MIL-R-83248/2-229

NSN: 5331-01-476-4295
FSC: 5331 — O-ring
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	RUBBER FLUOROCARBON CLASS FPM
hardness_rating	90.0 SHORE DUROMETER A NOMINAL
special_features	OXYGEN CLEAN
center_hole_diameter	2.339 INCHES MINIMUM AND 2.379 INCHES MAXIMUM IN
cross-sectional_height	0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
departure_from_cited_document	CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justification	ZZZW
material_document_and_classification	MIL-R-83248/2 MIL SPEC SINGLE MATERIAL RESPONSE
NSN	5331-01-476-4295

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN

•

HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL

•

CRITICALITY CODE JUSTIFICATION: ZZZW

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-83248/2 MIL SPEC SINGLE MATERIAL RESPONSE

•

DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D

•

CENTER HOLE DIAMETER: 2.339 INCHES MINIMUM AND 2.379 INCHES MAXIMUM IN

•

MATERIAL: RUBBER FLUOROCARBON CLASS FPM

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL HEIGHT	0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
HARDNESS RATING	90.0 SHORE DUROMETER A NOMINAL
CRITICALITY CODE JUSTIFICATION	ZZZW
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-R-83248/2 MIL SPEC SINGLE MATERIAL RESPONSE
DEPARTURE FROM CITED DOCUMENT	CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
SPECIAL FEATURES	OXYGEN CLEAN
CENTER HOLE DIAMETER	2.339 INCHES MINIMUM AND 2.379 INCHES MAXIMUM IN
MATERIAL	RUBBER FLUOROCARBON CLASS FPM

SUBSTITUTES & CROSS-REFERENCES 5

MIL-R-83248/2Reference document

Same NSN cross-reference

Reference document — Identification reference

M83248/2-229CPReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

M83248Reference document

Same NSN cross-reference

Reference document — Secondary reference

M83248/2-229Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

AS3581-229CPReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy MIL-R-83248/2-229?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MIL-R-83248/2-229?

MIL-R-83248/2-229 is a O-RING.

What parts can replace MIL-R-83248/2-229?

There are 5 known substitutes for MIL-R-83248/2-229: MIL-R-83248/2, M83248/2-229CP, M83248 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MIL-R-83248/2-229?

MIL-R-83248/2-229 is cataloged in the U.S. Government catalog under NSN 5331-01-476-4295. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MIL-R-83248/2-229 — O-RING

Request a Quote — MIL-R-83248/2-229