PartsTable
Technical Data Sheet
PartsTable / O-RING / MIL-R-6855 CL2 GR60
MIL-R-6855 CL2 GR60 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TUBING,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER GROMMET, criticality_code_justification: FEAT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-141-4233, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-R-6855 CL2 GR60
NSN: 5331-00-141-4233
FSC: 5331 — O-RING
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialRUBBER GROMMET
special_featuresMATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS
criticality_code_justificationFEAT
NSN5331-00-141-4233
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MIL-R-6855 CL2 GR60 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIALRUBBER CHLOROPRENE CLASS CR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
MILR6855Interchangeable
interchangeable cross-reference
interchangeable
MILR6855CL2GR60Interchangeable
interchangeable cross-reference
interchangeable
M6955/1-107627Interchangeable
interchangeable cross-reference
interchangeable
M6855/4-10L029Interchangeable
interchangeable cross-reference
interchangeable
401153Interchangeable
interchangeable cross-reference
interchangeable
5330PL1851936Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-R-6855 CL2 GR60?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-R-6855 CL2 GR60?
MIL-R-6855 CL2 GR60 is a TUBING,NONMETALLIC.
What parts can replace MIL-R-6855 CL2 GR60?
There are 18 known substitutes for MIL-R-6855 CL2 GR60: MILR6855, MILR6855CL2GR60, M6955/1-107627 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-R-6855 CL2 GR60?
MIL-R-6855 CL2 GR60 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-141-4233. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-R-6855 CL2 GR60

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026