MIL-R-6855 CL-1 GR-60 — TUBING,NONMETALLIC

✓ Government record, cited

— · PIPE SECTION

PRODUCT OVERVIEW

MIL-R-6855 CL-1 GR-60: TUBING,NONMETALLIC.

The TUBING,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hole_diameter: 0.560 INCHES NOMINAL IN, overall_height: 2.750 INCHES NOMINAL IN, special_features: NHA DRUM ASSY, WINCH 14874741, end_item_identification: LOS ANGELES CLASS SSN (688). This part is cataloged in the U.S.

Government catalog under NSN 4720-00-235-5483, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MIL-R-6855 CL-1 GR-60

NSN: 4720-00-235-5483
NIINs: 002355483, 005991168, 007985412, 011323430, 014942332
FSC: 4720 — Hose and Flexible Tubing
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	RUBBER SYNTHETIC OVERALL
hole_diameter	0.560 INCHES NOMINAL IN
overall_height	2.750 INCHES NOMINAL IN
special_features	NHA DRUM ASSY, WINCH 14874741
end_item_identification	LOS ANGELES CLASS SSN (688)
NSN	4720-00-235-5483

COMPONENT DIAGRAM

KEY FEATURES

•

FLEXIBILITY: FLEXIBLE

•

CROSS-SECTIONAL SHAPE STYLE: ROUND

•

OUTSIDE DIAMETER: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN

•

SPECIFICATION/STANDARD DATA: 81349-MIL-R-6855 GOVERNMENT SPECIFICATION

•

NONDEFINITIVE SPEC/STD DATA: 60 GRADE AND 1 CLASS

•

INSIDE DIAMETER: 0.250 INCHES NOMINAL IN

•

INSIDE SURFACE CONDITION: SMOOTH

•

MINIMUM TENSILE STRENGTH: 1300 POUNDS PER SQUARE INCH LBS

TECHNICAL CHARACTERISTICS

FLEXIBILITY	FLEXIBLE
CROSS-SECTIONAL SHAPE STYLE	ROUND
OUTSIDE DIAMETER	0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA	81349-MIL-R-6855 GOVERNMENT SPECIFICATION
NONDEFINITIVE SPEC/STD DATA	60 GRADE AND 1 CLASS
INSIDE DIAMETER	0.250 INCHES NOMINAL IN
INSIDE SURFACE CONDITION	SMOOTH
MINIMUM TENSILE STRENGTH	1300 POUNDS PER SQUARE INCH LBS
MEDIA FOR WHICH DESIGNED	FUEL/OIL, HYDROCARBON SINGLE RESPONSE
OUTER COVERING ENVIRONMENTAL PROTECTION	FUEL RESISTANT AND OIL RESISTANT

SUBSTITUTES & CROSS-REFERENCES 3

M6855/4-04L109Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MIL-R-6855Reference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-PRF-6855/4Reference document

Same NSN cross-reference

Reference document — Identification reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy MIL-R-6855 CL-1 GR-60?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MIL-R-6855 CL-1 GR-60?

MIL-R-6855 CL-1 GR-60 is a TUBING,NONMETALLIC.

What parts can replace MIL-R-6855 CL-1 GR-60?

There are 3 known substitutes for MIL-R-6855 CL-1 GR-60: M6855/4-04L109, MIL-R-6855, MIL-PRF-6855/4. Substitute compatibility should be verified for your specific system.

What is the NSN for MIL-R-6855 CL-1 GR-60?

MIL-R-6855 CL-1 GR-60 is cataloged in the U.S. Government catalog under NSN 4720-00-235-5483. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MIL-R-6855 CL-1 GR-60 — TUBING,NONMETALLIC

Request a Quote — MIL-R-6855 CL-1 GR-60