PartsTable
Technical Data Sheet
PartsTable / O-RING / MIL-R-38248/1
MIL-R-38248/1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MIL-R-38248/1 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-167-5110, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-R-38248/1
NSN: 5331-00-167-5110
FSC: 5331 — O-RING
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberMIL-R-38248/1
NSN5331-00-167-5110
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MIL-R-38248/1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
OUTSIDE DIAMETER: 1.239 INCHES MINIMUM AND 1.271 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 1.039 INCHES MINIMUM AND 1.059 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
ELONGATION PERCENTAGE125 MAXIMUM
OUTSIDE DIAMETER1.239 INCHES MINIMUM AND 1.271 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER1.039 INCHES MINIMUM AND 1.059 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
R440-5Interchangeable
interchangeable cross-reference
interchangeable
440-5Interchangeable
interchangeable cross-reference
interchangeable
6515001036659Interchangeable
interchangeable cross-reference
interchangeable
MILP36744Interchangeable
interchangeable cross-reference
interchangeable
Y197Interchangeable
interchangeable cross-reference
interchangeable
Y132Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-R-38248/1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-R-38248/1?
MIL-R-38248/1 is a MIL-R-38248/1.
What parts can replace MIL-R-38248/1?
There are 27 known substitutes for MIL-R-38248/1: R440-5, 440-5, 6515001036659 and 24 more. Substitute compatibility should be verified for your specific system.
Is MIL-R-38248/1 still available?
MIL-R-38248/1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-R-38248/1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026