Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
HARNESS,MOUNTAIN CLIMBING-RESCUE. Key specifications include length: 131.000 FEET NOMINAL FT, material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -30.0 FAHRENHEIT AND 150.0 FAHRENHEIT DEGF, special_features: 0.19 BY 45 DEG CHAMFER ON TWO SIDES FULL LGT, surface_condition: SMOOTH BOTH SIDES, fabrication_method: SOLID. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-026-7927, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MIL-R-2765
NSN:5330-00-026-7927 FSC:5330 CAGE:81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
length
131.000 FEET NOMINAL FT
material
RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating
-30.0 FAHRENHEIT AND 150.0 FAHRENHEIT DEGF
special_features
0.19 BY 45 DEG CHAMFER ON TWO SIDES FULL LGT
surface_condition
SMOOTH BOTH SIDES
fabrication_method
SOLID
cross-sectional_width
0.250 INCHES NOMINAL IN
cross-sectional_height
1.250 INCHES NOMINAL IN
supplementary_features
CUT TO SUIT
end_item_identification
CVN65 LSWE THIRD DECK HATCH COVER
environmental_protection
OIL RESISTANT AND SALT WATER RESISTANT
minimum_tensile_strength
ERR-060
NSN
5330-00-026-7927
COMPONENT DIAGRAM
KEY FEATURES
•
SURFACE CONDITION: SMOOTH BOTH SIDES
•
CROSS-SECTIONAL WIDTH: 0.250 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
•
CROSS-SECTIONAL HEIGHT: 0.500 INCHES NOMINAL IN
•
NONMETALLIC HARDNESS RATING: 35.0 MINIMUM SHORE DUROMETER A AND 55.0 MAXIMUM SHORE DUROMETER A
•
LENGTH: 78.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE CONDITION
SMOOTH BOTH SIDES
CROSS-SECTIONAL WIDTH
0.250 INCHES NOMINAL IN
MATERIAL
RUBBER SYNTHETIC
CROSS-SECTIONAL HEIGHT
0.500 INCHES NOMINAL IN
NONMETALLIC HARDNESS RATING
35.0 MINIMUM SHORE DUROMETER A AND 55.0 MAXIMUM SHORE DUROMETER A
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-R-2765?
MIL-R-2765 is a HARNESS,MOUNTAIN CLIMBING-RESCUE.
What parts can replace MIL-R-2765?
There are 8 known substitutes for MIL-R-2765: 6752-001, 069000245, 11665311 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-R-2765?
MIL-R-2765 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-026-7927. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.