PartsTable
Technical Data Sheet
PartsTable / MRO / MIL-R-26
MIL-R-26 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include body_width: 1.187 INCHES NOMINAL IN, body_height: 0.375 INCHES NOMINAL IN, body_length: 5.938 INCHES MINIMUM AND 6.062 INCHES MAXIMUM IN, body_diameter: 1.312 INCHES MAXIMUM IN, cubic_measure: 0.003 CUBIC INCHES, terminal_type: TAB, SOLDER LUG. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-00-023-7697, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ MIL-R-26
NSN: 5905-00-023-7697
FSC: 5905
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
body_width1.187 INCHES NOMINAL IN
body_height0.375 INCHES NOMINAL IN
body_length5.938 INCHES MINIMUM AND 6.062 INCHES MAXIMUM IN
body_diameter1.312 INCHES MAXIMUM IN
cubic_measure0.003 CUBIC INCHES
terminal_typeTAB, SOLDER LUG
inclosure_typeENCASED
terminal_width0.172 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
terminal_length0.438 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
special_featuresMATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIV
style_designatorRADIAL TERMINAL EACH END
features_providedMOUNTING HARDWARE
NSN5905-00-023-7697
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,FIXED,WIRE WOUND TITLE COMPONENT PN MIL-R-26 MFR RESISTOR,FIXED,WIRE WO
KEY FEATURES
•
POWER DISSIPATION RATING IN WATTS: 8.000 FREE AIR
•
AMBIENT TEMP AT FULL RATED POWER: 25.0 CELSIUS DEGC
•
AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER: 275.0
•
BODY LENGTH: 1.000 INCHES NOMINAL IN
•
BODY DIAMETER: 0.469 INCHES NOMINAL IN
•
TERMINAL LENGTH: 0.328 INCHES NOMINAL IN
•
TEST DATA DOCUMENT: 81349-MILR26/3 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
STYLE DESIGNATOR: RADIAL TERMINAL EACH END
TECHNICAL CHARACTERISTICS (FLIS)
POWER DISSIPATION RATING IN WATTS8.000 FREE AIR
AMBIENT TEMP AT FULL RATED POWER25.0 CELSIUS DEGC
AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER275.0
BODY LENGTH1.000 INCHES NOMINAL IN
BODY DIAMETER0.469 INCHES NOMINAL IN
TERMINAL LENGTH0.328 INCHES NOMINAL IN
TEST DATA DOCUMENT81349-MILR26/3 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
STYLE DESIGNATORRADIAL TERMINAL EACH END
INCLOSURE TYPEENCAPSULATED
TERMINAL TYPETAB, SOLDER LUG
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
RW30G331Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-R-26?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-R-26?
MIL-R-26 is a RESISTOR,FIXED,WIRE WOUND. It is classified as a MRO (MRO_GENERAL).
What parts can replace MIL-R-26?
There is 1 known substitute for MIL-R-26: RW30G331. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-R-26?
MIL-R-26 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-00-023-7697. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-R-26

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026