PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-R-15624CL3( 0.250THK)
MIL-R-15624CL3( 0.250THK) ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MIL-R-15624CL3( 0.250THK) is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-374-7014, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-R-15624CL3( 0.250THK)
NSN: 5330-01-374-7014
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
Part NumberMIL-R-15624CL3( 0.250THK)
NSN5330-01-374-7014
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MIL-R-15624CL3( 0.250THK) MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-15624,CLASS 3 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
HARDNESS RATING: 50.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
•
STYLE DESIGNATOR: SQUARE
•
CROSS-SECTIONAL THICKNESS: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-15624,CLASS 3 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
HARDNESS RATING50.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
OVERALL LENGTH36.000 INCHES NOMINAL IN
STYLE DESIGNATORSQUARE
CROSS-SECTIONAL THICKNESS0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
18658Interchangeable
interchangeable cross-reference
interchangeable
CB90-43107-144Interchangeable
interchangeable cross-reference
interchangeable
MIL-R-15624 CL 3Interchangeable
interchangeable cross-reference
interchangeable
MIL-G-15624 CL 3Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-R-15624CL3( 0.250THK)?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-R-15624CL3( 0.250THK)?
MIL-R-15624CL3( 0.250THK) is a MIL-R-15624CL3( 0.250THK).
What parts can replace MIL-R-15624CL3( 0.250THK)?
There are 4 known substitutes for MIL-R-15624CL3( 0.250THK): 18658, CB90-43107-144, MIL-R-15624 CL 3 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-R-15624CL3( 0.250THK)?
MIL-R-15624CL3( 0.250THK) is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-374-7014. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-R-15624CL3( 0.250THK)

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026