MIL-PRF-39022/11 — CAPACITOR,FIXED,METALLIZED,PAPER

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

MIL-PRF-39022/11: CAPACITOR,FIXED,METALLIZED,PAPER.

CAPACITOR,FIXED,METALLIZED,PAPER. Key specifications include material: CERAMIC CASE, body_style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE, body_width: 0.210 INCHES NOMINAL IN, body_height: 0.110 INCHES NOMINAL IN, body_length: 0.240 INCHES NOMINAL IN, terminal_length: 1.250 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5910-01-324-3220, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ MIL-PRF-39022/11

NSN: 5910-01-324-3220
NIINs: 013243220, 013243221, 013244090, 013244091, 013244979, 013245828, 013250279, 013297677, 013307116, 013307117, 013795066, 014120441, 014354716, 014616392, 014638055, 014675769, 015096367
FSC: 5910 — Capacitors
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	CERAMIC CASE
body_style	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width	0.210 INCHES NOMINAL IN
body_height	0.110 INCHES NOMINAL IN
body_length	0.240 INCHES NOMINAL IN
terminal_length	1.250 INCHES MINIMUM IN
features_provided	HERMETICALLY SEALED CASE
terminal_diameter	0.025 INCHES NOMINAL IN
dielectric_material	PLASTIC POLYPROPYLENE
reliability_indicator	ESTABLISHED
end_item_identification	FILTERS E/I FSCM 81349
case_insulation_material	PLASTIC OR RUBBER
NSN	5910-01-324-3220

COMPONENT DIAGRAM

KEY FEATURES

•

TERMINAL DIAMETER: 0.024 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN

•

BODY STYLE: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE

•

TOLERANCE RANGE PER SECTION: -1.00 TO 1.00 PERCENT SINGLE SECTION

•

NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC

•

TERMINAL SURFACE TREATMENT: SOLDER

•

TERMINAL LENGTH: 1.250 INCHES MINIMUM IN

•

BODY WIDTH: 0.180 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN

•

BODY HEIGHT: 0.090 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS

TERMINAL DIAMETER	0.024 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
BODY STYLE	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
TOLERANCE RANGE PER SECTION	-1.00 TO 1.00 PERCENT SINGLE SECTION
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL LENGTH	1.250 INCHES MINIMUM IN
BODY WIDTH	0.180 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
BODY HEIGHT	0.090 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
RELIABILITY FAILURE RATE LEVEL IN PERCENT	1.000
FEATURES PROVIDED	HERMETICALLY SEALED CASE

SUBSTITUTES & CROSS-REFERENCES 2

MIL-C-39022/11Reference document

Same NSN cross-reference

Reference document — Secondary reference

M39022/11F102FMSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy MIL-PRF-39022/11?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MIL-PRF-39022/11?

MIL-PRF-39022/11 is a CAPACITOR,FIXED,METALLIZED,PAPER. It is classified as a MRO (MRO_GENERAL).

What parts can replace MIL-PRF-39022/11?

There are 2 known substitutes for MIL-PRF-39022/11: MIL-C-39022/11, M39022/11F102FM. Substitute compatibility should be verified for your specific system.

What is the NSN for MIL-PRF-39022/11?

MIL-PRF-39022/11 is cataloged in the U.S. Government catalog under NSN 5910-01-324-3220. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MIL-PRF-39022/11 — CAPACITOR,FIXED,METALLIZED,PAPER

Request a Quote — MIL-PRF-39022/11