MIL-PRF-39017/5 — Technical Data Sheet

✓ Verified by PartsTable

— · MRO · MRO_GENERAL

WHAT YOU NEED TO KNOW

Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel

Confirm exact part number — similar PNs may be different parts

PRODUCT OVERVIEW

The RESISTOR,FIXED,COMPOSITION is a the manufacturer industrial component. Key specifications include body_length: 0.130 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN, body_diameter: 0.058 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN, cubic_measure: 0.002 CUBIC INCHES, terminal_type: WIRE LEAD, inclosure_type: ENCAPSULATED, terminal_width: 0.032 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-00-012-2824, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ MIL-PRF-39017/5

NSN: 5905-00-012-2824
FSC: 5905
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

body_length	0.130 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
body_diameter	0.058 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
cubic_measure	0.002 CUBIC INCHES
terminal_type	WIRE LEAD
inclosure_type	ENCAPSULATED
terminal_width	0.032 INCHES NOMINAL IN
terminal_length	1.000 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
special_features	CONTINUOUS WORKING VOLTAGE SHOULD NOT EXCEED 200 VOLTS; MAXIMUM WEIGHT SHOULD NOT EXCEED 0.3 GRAM G
style_designator	AXIAL TERMINAL EACH END
electrical_resistance	750.000 KILOHMS
reliability_indicator	ESTABLISHED
unpackaged_unit_weight	0.3 GRAMS G
NSN	5905-00-012-2824

COMPONENT DIAGRAM

KEY FEATURES

•

RESISTANCE TOLERANCE IN PERCENT: -2.000 TO 2.000

•

TEST DATA DOCUMENT: 81349-MIL-R-39017 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

•

STYLE DESIGNATOR: AXIAL TERMINAL EACH END

•

TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS: -55.0 TO 150.0

•

TERMINAL LENGTH: 1.250 INCHES NOMINAL IN

•

INCLOSURE TYPE: ENCAPSULATED

•

TERMINAL TYPE: WIRE LEAD

•

RELIABILITY FAILURE RATE LEVEL IN PERCENT: 0.010

TECHNICAL CHARACTERISTICS (FLIS)

RESISTANCE TOLERANCE IN PERCENT	-2.000 TO 2.000
TEST DATA DOCUMENT	81349-MIL-R-39017 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
STYLE DESIGNATOR	AXIAL TERMINAL EACH END
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS	-55.0 TO 150.0
TERMINAL LENGTH	1.250 INCHES NOMINAL IN
INCLOSURE TYPE	ENCAPSULATED
TERMINAL TYPE	WIRE LEAD
RELIABILITY FAILURE RATE LEVEL IN PERCENT	0.010
AMBIENT TEMP AT FULL RATED POWER	70.0 CELSIUS DEGC
POWER DISSIPATION RATING IN WATTS	0.125 FREE AIR

VERIFIED SUBSTITUTES & CROSS-REFERENCES 21

C5123-1C103GMInterchangeable