MIL-PRF-39015/1 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

MIL-PRF-39015/1: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: RECTANGULAR W/MOUNTING HOLES/SLOTS, body_width: 0.190 INCHES NOMINAL IN, body_height: 0.315 INCHES NOMINAL IN, body_length: 1.250 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.058 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-039-9528, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ MIL-PRF-39015/1

NSN: 5905-00-039-9528
NIINs: 000399528, 001011630, 001158464, 001424523, 001530999, 001623949, 002561175, 004341569, 004694783, 005935037, 009745435, 010368708, 010489167, 010587867, 010605900, 010613736, 010615556, 010617038, 010648993, 010674616, 010682228, 010888152
FSC: 5905 — Resistor
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

body_style	RECTANGULAR W/MOUNTING HOLES/SLOTS
body_width	0.190 INCHES NOMINAL IN
body_height	0.315 INCHES NOMINAL IN
body_length	1.250 INCHES NOMINAL IN
shaft_style	ROUND, SLOTTED
shaft_length	0.058 INCHES NOMINAL IN
actuator_type	SINGLE SHAFT
cubic_measure	0.075 CUBIC INCHES
overall_width	0.190 INCHES NOMINAL IN
overall_height	0.815 INCHES NOMINAL IN
overall_length	1.308 INCHES NOMINAL IN
shaft_diameter	0.115 INCHES NOMINAL IN
NSN	5905-00-039-9528

COMPONENT DIAGRAM

KEY FEATURES

•

ELECTRICAL RESISTANCE PER SECTION: 1.0 KILOHMS SINGLE SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 150.0 SINGLE SECTION

•

SECTION QUANTITY: 1

•

MOUNTING FACILITY QUANTITY: 2

•

SHAFT DIAMETER: 0.115 INCHES NOMINAL IN

•

BODY STYLE: RECTANGULAR W/MOUNTING HOLES/SLOTS

•

TERMINAL LENGTH: 0.500 INCHES NOMINAL IN

•

MOUNTING METHOD: UNTHREADED HOLE(S)

TECHNICAL CHARACTERISTICS

ELECTRICAL RESISTANCE PER SECTION	1.0 KILOHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
SECTION QUANTITY	1
MOUNTING FACILITY QUANTITY	2
SHAFT DIAMETER	0.115 INCHES NOMINAL IN
BODY STYLE	RECTANGULAR W/MOUNTING HOLES/SLOTS
TERMINAL LENGTH	0.500 INCHES NOMINAL IN
MOUNTING METHOD	UNTHREADED HOLE(S)
BODY WIDTH	0.190 INCHES NOMINAL IN
BODY HEIGHT	0.315 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 5

871484-00Reference document

Same NSN cross-reference

Reference document — Secondary reference

5905000399528Reference document

Same NSN cross-reference

Reference document — Informative reference only

RTR12DP102PReference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-R-39015/1Reference document

Same NSN cross-reference

Reference document — Secondary reference

M39015/1-004PPSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy MIL-PRF-39015/1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MIL-PRF-39015/1?

MIL-PRF-39015/1 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).

What parts can replace MIL-PRF-39015/1?

There are 5 known substitutes for MIL-PRF-39015/1: 871484-00, 5905000399528, RTR12DP102P and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MIL-PRF-39015/1?

MIL-PRF-39015/1 is cataloged in the U.S. Government catalog under NSN 5905-00-039-9528. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MIL-PRF-39015/1 — RESISTOR,VARIABLE,WIRE WOUND,NON

Request a Quote — MIL-PRF-39015/1