MIL-PRF-19500/225 — Network Technical Data

✓ Verified by PartsTable

— · SFP TRANSCEIVER

WHAT YOU NEED TO KNOW

SR = Short Range (multimode, 300m) | LR = Long Range (single-mode, 10km) DOM = Digital Optical Monitoring — most enterprise SFPs support it

MATCH ALL THREE: Speed + Wavelength + Brand compatibility

PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include overall_length: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, transfer_ratio: 300.0 MAXIMUM STATIC FORWARD CURRENT TRANSFER RATIO, COMMON-EMITTER, mounting_method: TERMINAL, terminal_length: 0.500 INCHES NOMINAL IN, overall_diameter: 0.305 INCHES MINIMUM AND 0.335 INCHES MAXIMUM IN, special_features: JUNCTION PATTERN ARRANGEMENT: NPN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-054-0046, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MIL-PRF-19500/225

NSN: 5961-00-054-0046
FSC: 5961
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

overall_length	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
transfer_ratio	300.0 MAXIMUM STATIC FORWARD CURRENT TRANSFER RATIO, COMMON-EMITTER
mounting_method	TERMINAL
terminal_length	0.500 INCHES NOMINAL IN
overall_diameter	0.305 INCHES MINIMUM AND 0.335 INCHES MAXIMUM IN
special_features	JUNCTION PATTERN ARRANGEMENT: NPN
unable_to_decode	UNABLE TO DECODE
features_provided	HERMETICALLY SEALED CASE AND QUALITY ASSURANCE LEVEL TX
internal_configuration	JUNCTION CONTACT
semiconductor_material	SILICON
end_item_identification	5895-01-333-3040
terminal_circle_diameter	0.200 INCHES NOMINAL IN
NSN	5961-00-054-0046

COMPONENT DIAGRAM

KEY FEATURES

•

CURRENT RATING PER CHARACTERISTIC: 500.00 MILLIAMPERES MAXIMUM COLLECTOR CURRENT, DC

•

TERMINAL CIRCLE DIAMETER: 0.200 INCHES NOMINAL IN

•

TERMINAL TYPE AND QUANTITY: 3 UNINSULATED WIRE LEAD

•

TEST DATA DOCUMENT: 81349-MIL-S-19500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

•

INTERNAL CONFIGURATION: JUNCTION CONTACT

•

FEATURES PROVIDED: HERMETICALLY SEALED CASE

•

SPECIFICATION/STANDARD DATA: 81349-MIL-S-19500/225 GOVERNMENT SPECIFICATION

TECHNICAL CHARACTERISTICS (FLIS)

SPECIAL FEATURES	JUNCTION PATTERN ARRANGEMENT: NPN
CURRENT RATING PER CHARACTERISTIC	500.00 MILLIAMPERES MAXIMUM COLLECTOR CURRENT, DC
TERMINAL CIRCLE DIAMETER	0.200 INCHES NOMINAL IN
TERMINAL TYPE AND QUANTITY	3 UNINSULATED WIRE LEAD
TEST DATA DOCUMENT	81349-MIL-S-19500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
INTERNAL CONFIGURATION	JUNCTION CONTACT
FEATURES PROVIDED	HERMETICALLY SEALED CASE
SPECIFICATION/STANDARD DATA	81349-MIL-S-19500/225 GOVERNMENT SPECIFICATION
SEMICONDUCTOR MATERIAL	SILICON
OVERALL LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN

VERIFIED SUBSTITUTES & CROSS-REFERENCES 26

DSR20254-100Interchangeable