PartsTable
Technical Data Sheet
Download PDF

MIL-PRF-1149 TY 1 CL 1 — PACKING MATERIAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MIL-PRF-1149 TY 1 CL 1: PACKING MATERIAL.

The PACKING MATERIAL is a the manufacturer industrial component. Key specifications include length: 82.000 INCHES NOMINAL IN, material: RUBBER SYNTHETIC, minor_width: 0.500 INCHES NOMINAL IN, hardness_rating: 50.0 SHORE DUROMETER A NOMINAL OVERALL, outside_diameter: 0.500 INCHES NOMINAL IN, style_designator: CIRCULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-202-3386, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-PRF-1149 TY 1 CL 1
NSN: 5330-00-202-3386
NIINs: 002023386, 002979461, 016463826
FSC: 5330 — Packing and Gasket Materials
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
length82.000 INCHES NOMINAL IN
materialRUBBER SYNTHETIC
minor_width0.500 INCHES NOMINAL IN
hardness_rating50.0 SHORE DUROMETER A NOMINAL OVERALL
outside_diameter0.500 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.390 INCHES NOMINAL IN
fabrication_methodSOLID
cross-sectional_width0.676 INCHES NOMINAL IN
elongation_percentage300 MAXIMUM
cross-sectional_height0.500 INCHES NOMINAL IN
minimum_tensile_strengthERR-060
NSN5330-00-202-3386
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MIL-PRF-1149 TY 1 CL 1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 82.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.500 INCHES NOMINAL IN
•
MINIMUM TENSILE STRENGTH: ERR-060
•
CROSS-SECTIONAL WIDTH: 0.676 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: ANGLE
•
MINOR WIDTH: 0.500 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1 CLASS
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
LENGTH82.000 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.500 INCHES NOMINAL IN
MINIMUM TENSILE STRENGTHERR-060
CROSS-SECTIONAL WIDTH0.676 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEANGLE
MINOR WIDTH0.500 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1 CLASS
MATERIALRUBBER SYNTHETIC
FABRICATION METHODSOLID
SUBSTITUTES & CROSS-REFERENCES 1
MILG1149Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MIL-PRF-1149 TY 1 CL 1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-PRF-1149 TY 1 CL 1?
MIL-PRF-1149 TY 1 CL 1 is a PACKING MATERIAL.
What parts can replace MIL-PRF-1149 TY 1 CL 1?
There is 1 known substitute for MIL-PRF-1149 TY 1 CL 1: MILG1149. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-PRF-1149 TY 1 CL 1?
MIL-PRF-1149 TY 1 CL 1 is cataloged in the U.S. Government catalog under NSN 5330-00-202-3386. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-PRF-1149 TY 1 CL 1