PartsTable
Technical Data Sheet
PartsTable / O-RING / MIL-P-83461/1-134CP
MIL-P-83461/1-134CP ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MIL-P-83461/1-134CP is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-112-4060, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-P-83461/1-134CP
NSN: 5331-01-112-4060
FSC: 5331 — O-RING
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
Part NumberMIL-P-83461/1-134CP
NSN5331-01-112-4060
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MIL-P-83461/1-134CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 2.068 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 1.847 INCHES MINIMUM AND 1.877 INCHES MAXIMUM IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER2.068 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER1.847 INCHES MINIMUM AND 1.877 INCHES MAXIMUM IN
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
11-106134Interchangeable
interchangeable cross-reference
interchangeable
MS28775-134Interchangeable
interchangeable cross-reference
interchangeable
15488567Interchangeable
interchangeable cross-reference
interchangeable
803-4384536-6XX1-48Interchangeable
interchangeable cross-reference
interchangeable
803-1385714-6-04Interchangeable
interchangeable cross-reference
interchangeable
803-1385721-6-04Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-P-83461/1-134CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-P-83461/1-134CP?
MIL-P-83461/1-134CP is a MIL-P-83461/1-134CP.
What parts can replace MIL-P-83461/1-134CP?
There are 22 known substitutes for MIL-P-83461/1-134CP: 11-106134, MS28775-134, 15488567 and 19 more. Substitute compatibility should be verified for your specific system.
Is MIL-P-83461/1-134CP still available?
MIL-P-83461/1-134CP is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-P-83461/1-134CP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026