PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-P-5510/AS568-115
MIL-P-5510/AS568-115 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MIL-P-5510/AS568-115 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-242-0693, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-P-5510/AS568-115
NSN: 5330-01-242-0693
FSC: 5330
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberMIL-P-5510/AS568-115
NSN5330-01-242-0693
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MIL-P-5510/AS568-115 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
PERIPHERAL DIAMETER: 0.880 INCHES NOMINAL IN
•
DEPARTURE FROM CITED DOCUMENT: MATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.665 INCHES MINIMUM AND 0.683 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CRITICALITY CODE JUSTIFICATIONZZZW
PERIPHERAL DIAMETER0.880 INCHES NOMINAL IN
DEPARTURE FROM CITED DOCUMENTMATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.665 INCHES MINIMUM AND 0.683 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
2528918Interchangeable
interchangeable cross-reference
interchangeable
MILP5510Interchangeable
interchangeable cross-reference
interchangeable
AMS-P-5510Interchangeable
interchangeable cross-reference
interchangeable
5-131-04-024-00Interchangeable
interchangeable cross-reference
interchangeable
0921206-9Interchangeable
interchangeable cross-reference
interchangeable
MS28778-6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-P-5510/AS568-115?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-P-5510/AS568-115?
MIL-P-5510/AS568-115 is a MIL-P-5510/AS568-115.
What parts can replace MIL-P-5510/AS568-115?
There are 24 known substitutes for MIL-P-5510/AS568-115: 2528918, MILP5510, AMS-P-5510 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-P-5510/AS568-115?
MIL-P-5510/AS568-115 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-242-0693. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-P-5510/AS568-115

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026