PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-P-43607F
MIL-P-43607F ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PADLOCK is a the manufacturer industrial component. Key specifications include chain_length: 9.000 INCHES NOMINAL IN, shackle_diameter: 0.490 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN, special_features: HIGH SECURITY,FURNISHED W/ONE CONTROL KEY THAT WILL REMOVE CYLINDER PLUG, key_change_quantity: 100000. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-217-5068, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-P-43607F
NSN: 5340-01-217-5068
FSC: 5340
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
chain_length9.000 INCHES NOMINAL IN
shackle_diameter0.490 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
special_featuresHIGH SECURITY,FURNISHED W/ONE CONTROL KEY THAT WILL REMOVE CYLINDER PLUG
key_change_quantity100000
NSN5340-01-217-5068
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MIL-P-43607F MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHACKLE DIAMETER: 0.490 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
•
KEY CHANGE QUANTITY: 100000
•
CHAIN LENGTH: 9.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESHIGH SECURITY,FURNISHED W/ONE CONTROL KEY THAT WILL REMOVE CYLINDER PLUG
SHACKLE DIAMETER0.490 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
KEY CHANGE QUANTITY100000
CHAIN LENGTH9.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
95100-1Interchangeable
interchangeable cross-reference
interchangeable
ANFRT85VInterchangeable
interchangeable cross-reference
interchangeable
H-1025Interchangeable
interchangeable cross-reference
interchangeable
H-1200Interchangeable
interchangeable cross-reference
interchangeable
190078-024Interchangeable
interchangeable cross-reference
interchangeable
301-022688Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-P-43607F?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-P-43607F?
MIL-P-43607F is a PADLOCK.
What parts can replace MIL-P-43607F?
There are 12 known substitutes for MIL-P-43607F: 95100-1, ANFRT85V, H-1025 and 9 more. Substitute compatibility should be verified for your specific system.
Is MIL-P-43607F still available?
MIL-P-43607F is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-P-43607F

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026