PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-P-24752 CL 1
MIL-P-24752 CL 1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING MATERIAL is a the manufacturer industrial component. Key specifications include cross-sectional_width: 1.125 INCHES NOMINAL IN, cross-sectional_height: 1.125 INCHES NOMINAL IN, cross-sectional_shape_style: SQUARE, environmental_attribute_code: ASBESTOS ALTERNATIVE PRODUCTS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-202-3427, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-P-24752 CL 1
NSN: 5330-00-202-3427
FSC: 5330
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
cross-sectional_width1.125 INCHES NOMINAL IN
cross-sectional_height1.125 INCHES NOMINAL IN
cross-sectional_shape_styleSQUARE
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
NSN5330-00-202-3427
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MIL-P-24752 CL 1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: FLAX
•
CROSS-SECTIONAL WIDTH: 0.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.250 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 1 CLASS
•
FABRICATION METHOD: BRAIDED
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALFLAX
CROSS-SECTIONAL WIDTH0.250 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.250 INCHES NOMINAL IN
MATERIALFLAX
NONDEFINITIVE SPEC/STD DATA1 CLASS
NONDEFINITIVE SPEC/STD DATA1 CLASS
CROSS-SECTIONAL HEIGHT0.250 INCHES NOMINAL IN
FABRICATION METHODBRAIDED
CROSS-SECTIONAL WIDTH0.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
16283Interchangeable
interchangeable cross-reference
interchangeable
51 ELITEInterchangeable
interchangeable cross-reference
interchangeable
2503575Interchangeable
interchangeable cross-reference
interchangeable
52-393Interchangeable
interchangeable cross-reference
interchangeable
321-608Interchangeable
interchangeable cross-reference
interchangeable
1561-1000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-P-24752 CL 1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-P-24752 CL 1?
MIL-P-24752 CL 1 is a PACKING MATERIAL.
What parts can replace MIL-P-24752 CL 1?
There are 22 known substitutes for MIL-P-24752 CL 1: 16283, 51 ELITE, 2503575 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-P-24752 CL 1?
MIL-P-24752 CL 1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-202-3427. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-P-24752 CL 1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026