PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-P-24583
MIL-P-24583 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING MATERIAL is a the manufacturer industrial component. Key specifications include material: CARBON, special_features: TREATED WITH A POWDERED ZINC CORROSION INHIBITOR; 1/4 SQ IN SIZE, fabrication_method: BRAIDED, cross-sectional_width: 0.094 INCHES NOMINAL IN, cross-sectional_height: 0.094 INCHES NOMINAL IN, end_item_identification: VALVE, GATE 803-1385714-81AF. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-104-6150, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-P-24583
NSN: 5330-01-104-6150
FSC: 5330
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialCARBON
special_featuresTREATED WITH A POWDERED ZINC CORROSION INHIBITOR; 1/4 SQ IN SIZE
fabrication_methodBRAIDED
cross-sectional_width0.094 INCHES NOMINAL IN
cross-sectional_height0.094 INCHES NOMINAL IN
end_item_identificationVALVE, GATE 803-1385714-81AF
cross-sectional_shape_styleSQUARE
departure_from_cited_documentCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
NSN5330-01-104-6150
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MIL-P-24583 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.812 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.812 INCHES NOMINAL IN
•
MATERIAL: CARBON
•
FABRICATION METHOD: BRAIDED
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.812 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.812 INCHES NOMINAL IN
SPECIAL FEATURESMATERIAL IAW MIL-P-24583 TYPE 1, CLASS 1, GRADE N
MATERIALCARBON
FABRICATION METHODBRAIDED
CROSS-SECTIONAL SHAPE STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
D0D-P-24583 CLA SS 1 5/16 SQInterchangeable
interchangeable cross-reference
interchangeable
DOD-P-24583Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-24583.312Interchangeable
interchangeable cross-reference
interchangeable
D0D-P-24583 CLA SS I 3/8IN SQInterchangeable
interchangeable cross-reference
interchangeable
D0D-P-24583 CLA SS I 7/16IN SQInterchangeable
interchangeable cross-reference
interchangeable
D0D-P-24583 CLA SS I 9/16IN SQInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-P-24583?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-P-24583?
MIL-P-24583 is a PACKING MATERIAL.
What parts can replace MIL-P-24583?
There are 14 known substitutes for MIL-P-24583: D0D-P-24583 CLA SS 1 5/16 SQ, DOD-P-24583, MIL-P-24583.312 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-P-24583?
MIL-P-24583 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-104-6150. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-P-24583

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026