PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-P-24396 TYPE B 1/4IN
MIL-P-24396 TYPE B 1/4IN ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MIL-P-24396 TYPE B 1/4IN is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-129-0871, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-P-24396 TYPE B 1/4IN
NSN: 5330-01-129-0871
FSC: 5330
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberMIL-P-24396 TYPE B 1/4IN
NSN5330-01-129-0871
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MIL-P-24396 TYPE B 1/4IN MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.250 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-24396,TYPE B MIL SPEC SINGLE MATERIAL RESPONSE
•
NONDEFINITIVE SPEC/STD DATA: B TYPE
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
•
FABRICATION METHOD: BRAIDED
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.250 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.250 INCHES NOMINAL IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-24396,TYPE B MIL SPEC SINGLE MATERIAL RESPONSE
NONDEFINITIVE SPEC/STD DATAB TYPE
CROSS-SECTIONAL SHAPE STYLESQUARE
FABRICATION METHODBRAIDED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
MIL-P-24396Interchangeable
interchangeable cross-reference
interchangeable
C-1046 TY A 3-16INInterchangeable
interchangeable cross-reference
interchangeable
TYPE BInterchangeable
interchangeable cross-reference
interchangeable
MILP24396,TYPEB,0.125IN.SQInterchangeable
interchangeable cross-reference
interchangeable
MIL-P-24396,TYB,1.1560ODInterchangeable
interchangeable cross-reference
interchangeable
D40805-A-316SS-2.0IN-PC5(MOD)Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-P-24396 TYPE B 1/4IN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-P-24396 TYPE B 1/4IN?
MIL-P-24396 TYPE B 1/4IN is a MIL-P-24396 TYPE B 1/4IN.
What parts can replace MIL-P-24396 TYPE B 1/4IN?
There are 18 known substitutes for MIL-P-24396 TYPE B 1/4IN: MIL-P-24396, C-1046 TY A 3-16IN, TYPE B and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-P-24396 TYPE B 1/4IN?
MIL-P-24396 TYPE B 1/4IN is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-129-0871. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-P-24396 TYPE B 1/4IN

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026