PartsTable
Technical Data Sheet
Download PDF

MIL-P-17802D — PADLOCK SET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MIL-P-17802D: PADLOCK SET.

The PADLOCK SET is a the manufacturer industrial component. Key specifications include chain_length: 9.000 INCHES NOMINAL IN, construction: LAMINATED, overall_width: 1.500 INCHES NOMINAL IN, overall_height: 1.250 INCHES NOMINAL IN, padlock_quantity: 30, shackle_diameter: 0.240 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-838-5268, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-P-17802D
NSN: 5340-00-838-5268
FSC: 5340 — Hardware, Commercial
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
chain_length9.000 INCHES NOMINAL IN
constructionLAMINATED
overall_width1.500 INCHES NOMINAL IN
overall_height1.250 INCHES NOMINAL IN
padlock_quantity30
shackle_diameter0.240 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
shackle_clearance0.750 INCHES NOMINAL IN
surface_treatmentLACQUER OVERALL
key_change_quantity5000
operating_mechanism_typePIN TUMBLER WITH DEAD BOLT LOCKING CONSTRUCTION
individual_padlock_keying_typeKEYED ALIKE
NSN5340-00-838-5268
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MIL-P-17802D MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INDIVIDUAL PADLOCK KEYING TYPE: KEYED ALIKE
•
SHACKLE CLEARANCE: 0.750 INCHES NOMINAL IN
•
KEY CHANGE QUANTITY: 5000
•
OPERATING MECHANISM TYPE: PIN TUMBLER WITH DEAD BOLT LOCKING CONSTRUCTION
•
PADLOCK QUANTITY: 30
•
CHAIN LENGTH: 9.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.250 INCHES NOMINAL IN
INDIVIDUAL PADLOCK KEYING TYPEKEYED ALIKE
SHACKLE CLEARANCE0.750 INCHES NOMINAL IN
KEY CHANGE QUANTITY5000
OPERATING MECHANISM TYPEPIN TUMBLER WITH DEAD BOLT LOCKING CONSTRUCTION
PADLOCK QUANTITY30
OVERALL WIDTH1.500 INCHES NOMINAL IN
CHAIN LENGTH9.000 INCHES NOMINAL IN
SURFACE TREATMENTLACQUER OVERALL
SHACKLE DIAMETER0.240 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 4
A-A-1927CReference document
Same NSN cross-reference
Reference document — Secondary reference
A-A-59486Reference document
Same NSN cross-reference
Reference document — Identification reference
MS21313-128Reference document
Same NSN cross-reference
Reference document — Secondary reference
AA59486-1AB30S3Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MIL-P-17802D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-P-17802D?
MIL-P-17802D is a PADLOCK SET.
What parts can replace MIL-P-17802D?
There are 4 known substitutes for MIL-P-17802D: A-A-1927C, A-A-59486, MS21313-128 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-P-17802D?
MIL-P-17802D is cataloged in the U.S. Government catalog under NSN 5340-00-838-5268. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-P-17802D