PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-P-17416C NON-ASBESTOS
MIL-P-17416C NON-ASBESTOS ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING MATERIAL is a the manufacturer industrial component. Key specifications include special_features: CONTAIN NON-ASBESTOS MATERIALS, fabrication_method: BRAIDED, cross-sectional_width: 0.375 INCHES NOMINAL IN, cross-sectional_height: 0.375 INCHES NOMINAL IN, cross-sectional_shape_style: SQUARE, environmental_attribute_code: ASBESTOS ALTERNATIVE PRODUCTS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-508-4611, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-P-17416C NON-ASBESTOS
NSN: 5330-01-508-4611
FSC: 5330
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
special_featuresCONTAIN NON-ASBESTOS MATERIALS
fabrication_methodBRAIDED
cross-sectional_width0.375 INCHES NOMINAL IN
cross-sectional_height0.375 INCHES NOMINAL IN
cross-sectional_shape_styleSQUARE
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
NSN5330-01-508-4611
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MIL-P-17416C NON-ASBESTOS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.500 INCHES NOMINAL IN
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
•
FABRICATION METHOD: BRAIDED
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.500 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.500 INCHES NOMINAL IN
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
SPECIAL FEATURESCOMNTAIN NON-ASBESTOS MATERIAL
FABRICATION METHODBRAIDED
CROSS-SECTIONAL SHAPE STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
MIL-P-17416Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-17416C NON-ASBESTOSInterchangeable
interchangeable cross-reference
interchangeable
MIL-P-17416A NON-ASBESTOSInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-P-17416C NON-ASBESTOS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-P-17416C NON-ASBESTOS?
MIL-P-17416C NON-ASBESTOS is a PACKING MATERIAL.
What parts can replace MIL-P-17416C NON-ASBESTOS?
There are 3 known substitutes for MIL-P-17416C NON-ASBESTOS: MIL-P-17416, MIL-P-17416C NON-ASBESTOS, MIL-P-17416A NON-ASBESTOS. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-P-17416C NON-ASBESTOS?
MIL-P-17416C NON-ASBESTOS is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-508-4611. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-P-17416C NON-ASBESTOS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026