PartsTable
Technical Data Sheet
Download PDF

MIL-P-15817 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MIL-P-15817: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, overall_width: 1.250 INCHES NOMINAL IN, overall_height: 1.125 INCHES NOMINAL IN, left-side_flange_tip_style: LEFT SQUARE END, left_side_flange_thickness: 0.125 INCHES NOMINAL IN, cross-sectional_shape_style: OPEN CHANNEL. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-999-9053, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-P-15817
NSN: 5331-00-999-9053
NIINs: 009999053, 013022640
FSC: 5331 — O-ring
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialRUBBER SYNTHETIC
overall_width1.250 INCHES NOMINAL IN
overall_height1.125 INCHES NOMINAL IN
left-side_flange_tip_styleLEFT SQUARE END
left_side_flange_thickness0.125 INCHES NOMINAL IN
cross-sectional_shape_styleOPEN CHANNEL
right-side_flange_tip_styleRIGHT SQUARE END
right_side_flange_thickness0.125 INCHES NOMINAL IN
material_document_and_classificationMIL-P-15817 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5331-00-999-9053
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MIL-P-15817 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.090 INCHES MINIMUM AND 2.110 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.090 INCHES MINIMUM AND 2.110 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
SUBSTITUTES & CROSS-REFERENCES 1
B104085PC103601Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy MIL-P-15817?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-P-15817?
MIL-P-15817 is a O-RING.
What parts can replace MIL-P-15817?
There is 1 known substitute for MIL-P-15817: B104085PC103601. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-P-15817?
MIL-P-15817 is cataloged in the U.S. Government catalog under NSN 5331-00-999-9053. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-P-15817