PartsTable
Technical Data Sheet

MIL-N-45938/3 — NUT,PLAIN,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MIL-N-45938/3: NUT,PLAIN,CLINCH.

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, nut_style: CLINCH, nut_height: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, temp_rating: 450.0 FAHRENHEIT NOMINAL DEGF, nut_diameter: 0.435 INCHES MINIMUM AND 0.465 INCHES MAXIMUM IN, pilot_length: 0.110 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-701-2596, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-N-45938/3
NSN: 5310-00-701-2596
NIINs: 007012596, 009823356, 010358374, 010358375, 010537003, 010579348, 010606887, 010741495, 010768125, 010801749, 010802214, 010810784, 010834113, 011073584, 011140979, 011328550, 011727108, 011976617, 011988563, 011993423, 012022694, 012097218, 012139960, 012412684, 012571700, 012889384, 013237956, 013947291
FSC: 5310 — Nuts and Washers
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
nut_styleCLINCH
nut_height0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
temp_rating450.0 FAHRENHEIT NOMINAL DEGF
nut_diameter0.435 INCHES MINIMUM AND 0.465 INCHES MAXIMUM IN
pilot_length0.110 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNJC
pilot_diameter0.369 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN
hardness_rating90.0 ROCKWELL B MAXIMUM
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
NSN5310-00-701-2596
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MIL-N-45938/3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: DRY FILM LUBRICANT
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
TEMP RATING: 450.0 FAHRENHEIT MAXIMUM DEGF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
NUT DIAMETER: 0.350 INCHES NOMINAL IN
•
PILOT DIAMETER: 0.274 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LUBRICATIONDRY FILM LUBRICANT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
TEMP RATING450.0 FAHRENHEIT MAXIMUM DEGF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
NUT DIAMETER0.350 INCHES NOMINAL IN
PILOT DIAMETER0.274 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
PILOT LENGTH0.088 INCHES NOMINAL IN
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
SUBSTITUTES & CROSS-REFERENCES 8
2088624-5Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
RPN8-32SCLReference document
Same NSN cross-reference
Reference document — Secondary reference
W013001-001Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
10050024-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
8954809-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
717890-26Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MIL-N-45938/3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-N-45938/3?
MIL-N-45938/3 is a NUT,PLAIN,CLINCH.
What parts can replace MIL-N-45938/3?
There are 8 known substitutes for MIL-N-45938/3: 2088624-5, RPN8-32SCL, W013001-001 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-N-45938/3?
MIL-N-45938/3 is cataloged in the U.S. Government catalog under NSN 5310-00-701-2596. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-N-45938/3