MIL-M-80255 — MACHINING CENTER

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

MIL-M-80255: MACHINING CENTER.

The MACHINING CENTER is a the manufacturer industrial component. This part is cataloged in the U.S. Government catalog under NSN 3408-01-084-1536, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MIL-M-80255

NSN: 3408-01-084-1536
NIINs: 010841536, 011605457, 013116673, 013808565
FSC: 3408 — Machining Centers and Way-type Machines
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

Part Number	MIL-M-80255
NSN	3408-01-084-1536

COMPONENT DIAGRAM

KEY FEATURES

•

GENERAL CHARACTERISTICS ITEM DESCRIPTION: SPINDLE MOTOR HP 10;CAPACITY (IN SAE 3020 STEEL) DRILL,DIA,IN. 1.75,TAP,DIA,IN.,1.50,MILL,CVBIC IN. PER MIN. 10;SPINDLE SPEEDS 32;SPINDLE SPEED RANGE,RPM 70-3000;SPINDLE FEED,NUMBER INFINITE;SPINDLE FEED RATE RANGE (IN. PER MINUTE) 0.5 TO 200;SPINDLE TRAVEL 12IN.;SPINDLE RAPID TRAVERSE RATE (IN. PER MINUTE) 200;MACHINING HEAD VERTICALTRAVEL 20.0IN.;MACHINING HEAD VERTICALRAPID TRAVERSE RATE 200.0IPM;WORK MOVNTING SURFACE 54 BY 20IN.;LOAD CAPACITY 3000LBS;WORKTABLE TRAVEL X-AXIS 90IN. Y-AXIS 26IN.;WORKTABLE RAPID TRAVERSE RATE 200.0IPM;MILLING FEEDS,MUNBER,200;MILLING FEED RATE RANGE INFINITE LBS

TECHNICAL CHARACTERISTICS

GENERAL CHARACTERISTICS ITEM DESCRIPTION

SPINDLE MOTOR HP 10;CAPACITY (IN SAE 3020 STEEL) DRILL,DIA,IN. 1.75,TAP,DIA,IN.,1.50,MILL,CVBIC IN. PER MIN. 10;SPINDLE SPEEDS 32;SPINDLE SPEED RANGE,RPM 70-3000;SPINDLE FEED,NUMBER INFINITE;SPINDLE FEED RATE RANGE (IN. PER MINUTE) 0.5 TO 200;SPINDLE TRAVEL 12IN.;SPINDLE RAPID TRAVERSE RATE (IN. PER MINUTE) 200;MACHINING HEAD VERTICALTRAVEL 20.0IN.;MACHINING HEAD VERTICALRAPID TRAVERSE RATE 200.0IPM;WORK MOVNTING SURFACE 54 BY 20IN.;LOAD CAPACITY 3000LBS;WORKTABLE TRAVEL X-AXIS 90IN. Y-AXIS 26IN.;WORKTABLE RAPID TRAVERSE RATE 200.0IPM;MILLING FEEDS,MUNBER,200;MILLING FEED RATE RANGE INFINITE LBS

SUBSTITUTES & CROSS-REFERENCES 1

3408-3213-3923Reference document

Same NSN cross-reference

Reference document — Informative reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy MIL-M-80255?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MIL-M-80255?

MIL-M-80255 is a MACHINING CENTER.

What parts can replace MIL-M-80255?

There is 1 known substitute for MIL-M-80255: 3408-3213-3923. Substitute compatibility should be verified for your specific system.

What is the NSN for MIL-M-80255?

MIL-M-80255 is cataloged in the U.S. Government catalog under NSN 3408-01-084-1536. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MIL-M-80255 — MACHINING CENTER

Request a Quote — MIL-M-80255