MIL-M-38510/115 — Technical Data Sheet

✓ Verified by PartsTable

— · COMPONENT

WHAT YOU NEED TO KNOW

Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel

Confirm exact part number — similar PNs may be different parts

PRODUCT OVERVIEW

CLAMP,CABLE,ELECTRICAL CONNECTOR. Key specifications include body_width: 0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, body_height: 0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, body_length: 0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN, features_provided: MONOLITHIC, precious_material: GOLD, inclosure_material: SILICON. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5962-01-100-8948, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MIL-M-38510/115

NSN: 5962-01-100-8948
FSC: 5962
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

body_width	0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
body_height	0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
body_length	0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN
features_provided	MONOLITHIC
precious_material	GOLD
inclosure_material	SILICON
storage_temp_range	-65.0 TO 150.0 CELSIUS DEGC
operating_temp_range	-55.0 TO 125.0 CELSIUS DEGC
body_outside_diameter	0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN
input_circuit_pattern	1 INPUT
end_item_identification	DISPLAY GRP 76301
inclosure_configuration	CAN
NSN	5962-01-100-8948

COMPONENT DIAGRAM

KEY FEATURES

•

INCLOSURE CONFIGURATION: CAN

•

TERMINAL SURFACE TREATMENT: SOLDER

•

BODY WIDTH: 0.990 INCHES MINIMUM AND 1.050 INCHES MAXIMUM IN

•

TEST DATA DOCUMENT: 14933-77040 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

•

SPECIFICATION/STANDARD DATA: 81349-MIL-M-38510/115 GOVERNMENT SPECIFICATION

•

FEATURES PROVIDED: HERMETICALLY SEALED AND MONOLITHIC AND NEGATIVE OUTPUTS AND POSITIVE OUTPUTS

•

OPERATING TEMP RANGE: -55.0 TO 150.0 CELSIUS DEGC

•

BODY LENGTH: 1.439 INCHES MINIMUM AND 1.573 INCHES MAXIMUM IN

TYPICAL APPLICATIONS

Server Internal Cabling
Data Center Cable Infrastructure
SAS/SATA Drive Connectivity

TECHNICAL CHARACTERISTICS (FLIS)

INCLOSURE CONFIGURATION	CAN
TERMINAL SURFACE TREATMENT	SOLDER
BODY WIDTH	0.990 INCHES MINIMUM AND 1.050 INCHES MAXIMUM IN
TEST DATA DOCUMENT	14933-77040 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
SPECIFICATION/STANDARD DATA	81349-MIL-M-38510/115 GOVERNMENT SPECIFICATION
FEATURES PROVIDED	HERMETICALLY SEALED AND MONOLITHIC AND NEGATIVE OUTPUTS AND POSITIVE OUTPUTS
OPERATING TEMP RANGE	-55.0 TO 150.0 CELSIUS DEGC
BODY LENGTH	1.439 INCHES MINIMUM AND 1.573 INCHES MAXIMUM IN
STORAGE TEMP RANGE	-65.0 TO 150.0 CELSIUS DEGC
BODY HEIGHT	0.250 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN

VERIFIED SUBSTITUTES & CROSS-REFERENCES 30

77-040Interchangeable