PartsTable
Technical Data Sheet

MIL-M-38510/101 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

MIL-M-38510/101: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include body_width: 0.250 INCHES NOMINAL IN, body_height: 0.030 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN, body_length: 0.250 INCHES NOMINAL IN, overall_width: 0.740 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN, overall_height: 0.325 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN, overall_length: 0.785 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5962-00-007-4079, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-M-38510/101
NSN: 5962-00-007-4079
NIINs: 000074079, 001676330, 002740200, 003655536, 004287136, 004288079, 005995695, 007620633, 010107808, 010140499, 010178412, 010243693, 010245754, 010310565, 010342147, 010406377, 010437520, 010438326, 010453315, 010577884, 010628806, 010690413, 010692600, 010728381, 010826339, 010834317, 010919642, 010954885, 011061299, 011098825, 011127196, 011130831, 011291151, 011331265, 011341786, 011412594, 011422383, 012137448, 012288767, 012351277, 012351283, 012351294, 012351295, 012351296, 012351301, 012351302, 012351303, 012351304, 012447784, 012566191, 012867062, 012879492, 012890826, 012894264, 012901273, 012910880, 012916195, 012929184, 013008585, 013113252, 013142035, 013222072, 013266059, 013329863, 013707263, 015052511
FSC: 5962 — Microcircuits, Electronic
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
body_width0.250 INCHES NOMINAL IN
body_height0.030 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
body_length0.250 INCHES NOMINAL IN
overall_width0.740 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
overall_height0.325 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
overall_length0.785 INCHES MAXIMUM IN
overall_diameter0.375 INCHES MAXIMUM IN
special_featuresFOR SUPPLY VOLTAGES LESS THAN PLUS OR MINUS 20 VDC; THE ABSOLUTE MAXIMUM VOLTAGE IS EQUAL TO THE SUPPLY VOLTAGE VDC
features_providedMONOLITHIC
precious_materialGOLD
inclosure_materialSILICON
storage_temp_range-65.0 TO 150.0 CELSIUS DEGC
NSN5962-00-007-4079
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,PRE TITLE COMPONENT PN MIL-M-38510/101 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
INPUT CIRCUIT PATTERN: DUAL 2 INPUT
•
INCLOSURE MATERIAL: CERAMIC AND GLASS
•
TERMINAL SURFACE TREATMENT: GOLD
•
PRECIOUS MATERIAL: GOLD
•
DESIGN FUNCTION AND QUANTITY: 2 AMPLIFIER, OPERATIONAL, GENERAL PURPOSE
•
BODY WIDTH: 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
•
BODY HEIGHT: 0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
•
FEATURES PROVIDED: HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND HIGH GAIN AND INTERNALLY COMPENSATED AND NEGATIVE OUTPUTS
TECHNICAL CHARACTERISTICS
INPUT CIRCUIT PATTERNDUAL 2 INPUT
INCLOSURE MATERIALCERAMIC AND GLASS
TERMINAL SURFACE TREATMENTGOLD
PRECIOUS MATERIALGOLD
DESIGN FUNCTION AND QUANTITY2 AMPLIFIER, OPERATIONAL, GENERAL PURPOSE
BODY WIDTH0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
BODY HEIGHT0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
FEATURES PROVIDEDHERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND HIGH GAIN AND INTERNALLY COMPENSATED AND NEGATIVE OUTPUTS
INCLOSURE CONFIGURATIONDUAL-IN-LINE
CASE OUTLINE SOURCE AND DESIGNATORD-1 MIL-M-38510
SUBSTITUTES & CROSS-REFERENCES 10
747EDCReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
UA747CAReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
UA74DMQCReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
63A133445P72Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MIL-M-38510Reference document
Same NSN cross-reference
Reference document — Secondary reference
431-015-9002Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy MIL-M-38510/101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-M-38510/101?
MIL-M-38510/101 is a RESISTOR,VARIABLE,WIRE WOUND,PRE.
What parts can replace MIL-M-38510/101?
There are 10 known substitutes for MIL-M-38510/101: 747EDC, UA747CA, UA74DMQC and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-M-38510/101?
MIL-M-38510/101 is cataloged in the U.S. Government catalog under NSN 5962-00-007-4079. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-M-38510/101

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.