PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-M-19595C
MIL-M-19595C ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.066 INCHES NOMINAL IN, diameter: 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN, material: STEEL COMP 440A OVERALL A, head_style: FILLISTER, style_designator: STRAIGHT, pin_chamfer_angle: 80.0 DEGREES MINIMUM AND 90.0 DEGREES MAXIMUM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-776-7013, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-M-19595C
NSN: 5315-00-776-7013
FSC: 5315
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
height0.066 INCHES NOMINAL IN
diameter0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
materialSTEEL COMP 440A OVERALL A
head_styleFILLISTER
style_designatorSTRAIGHT
pin_chamfer_angle80.0 DEGREES MINIMUM AND 90.0 DEGREES MAXIMUM
pin_head_diameter0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
under_head_length0.304 INCHES MINIMUM AND 0.314 INCHES MAXIMUM IN
reference_number_differentiating_characteristicsINSPECTED IN ACCORDANCE WITH MIL-M-19595
NSN5315-00-776-7013
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MIL-M-19595C · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 440A OVERALL A
•
HEIGHT: 0.066 INCHES NOMINAL IN
•
HEAD STYLE: FILLISTER
•
STYLE DESIGNATOR: STRAIGHT
•
DIAMETER: 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 80.0 DEGREES MINIMUM AND 90.0 DEGREES MAXIMUM
•
UNDER HEAD LENGTH: 0.304 INCHES MINIMUM AND 0.314 INCHES MAXIMUM IN
•
PIN HEAD DIAMETER: 0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 440A OVERALL A
HEIGHT0.066 INCHES NOMINAL IN
HEAD STYLEFILLISTER
STYLE DESIGNATORSTRAIGHT
DIAMETER0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
PIN CHAMFER ANGLE80.0 DEGREES MINIMUM AND 90.0 DEGREES MAXIMUM
UNDER HEAD LENGTH0.304 INCHES MINIMUM AND 0.314 INCHES MAXIMUM IN
PIN HEAD DIAMETER0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSINSPECTED IN ACCORDANCE WITH MIL-M-19595
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
100025Interchangeable
interchangeable cross-reference
interchangeable
355552SInterchangeable
interchangeable cross-reference
interchangeable
600AS100Interchangeable
interchangeable cross-reference
interchangeable
HRU926AInterchangeable
interchangeable cross-reference
interchangeable
79NM-62Interchangeable
interchangeable cross-reference
interchangeable
1287424-5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-M-19595C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-M-19595C?
MIL-M-19595C is a PIN,STRAIGHT,HEADED.
What parts can replace MIL-M-19595C?
There are 17 known substitutes for MIL-M-19595C: 100025, 355552S, 600AS100 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-M-19595C?
MIL-M-19595C is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-776-7013. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-M-19595C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026