MIL-L-52087 — CYLINDER ASSEMBLY,ACTUATING,LINE

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

MIL-L-52087: CYLINDER ASSEMBLY,ACTUATING,LINE.

CYLINDER ASSEMBLY,ACTUATING,LINE. Key specifications include material: STEEL COMP 4340, end_similarity: IDENTICAL, overall_length: 35.875 INCHES NOMINAL IN, surface_finish: 32.0 MICROINCHES, first_end_style: FLAT GROOVED, special_features: 125 K-PSI MIN YIELD;140 K-PSI MINTENSILE STRENGTH;15 PERCENT ELONGATIONIN TWO (2) IN;SURFACE HARDNESS TO ROCKWELL C45-50. This part is cataloged in the U.S.

Government catalog under NSN 5342-00-542-3095, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MIL-L-52087

NSN: 5342-00-542-3095
NIINs: 005423095, 005423097, 005423099, 005423100, 005423104, 005423106, 005423107, 005423108, 005423113
FSC: 5342 — Hardware, Weapon System
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	STEEL COMP 4340
end_similarity	IDENTICAL
overall_length	35.875 INCHES NOMINAL IN
surface_finish	32.0 MICROINCHES
first_end_style	FLAT GROOVED
special_features	125 K-PSI MIN YIELD;140 K-PSI MINTENSILE STRENGTH;15 PERCENT ELONGATIONIN TWO (2) IN;SURFACE HARDNESS TO ROCKWELL C45-50
first_end_diameter	2.9950 INCHES MINIMUM AND 3.0000 INCHES MAXIMUM IN
end_item_identification	5420010766096
first_end_grooved_flat_depth	0.401 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
first_end_grooved_flat_length	4.0313 INCHES MINIMUM AND 4.0625 INCHES MAXIMUM IN
first_end_distance_from_end_to_flat	15.906 INCHES MINIMUM AND 15.938 INCHES MAXIMUM IN
material_document_and_classification	ASTM A322 ASSN STD SINGLE MATERIAL RESPONSE
NSN	5342-00-542-3095

COMPONENT DIAGRAM

KEY FEATURES

•

REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: ENG DWG D-11524-20-2

TECHNICAL CHARACTERISTICS

REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS

ENG DWG D-11524-20-2

SUBSTITUTES & CROSS-REFERENCES 2

11524-20-2Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

980713Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy MIL-L-52087?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MIL-L-52087?

MIL-L-52087 is a CYLINDER ASSEMBLY,ACTUATING,LINE.

What parts can replace MIL-L-52087?

There are 2 known substitutes for MIL-L-52087: 11524-20-2, 980713. Substitute compatibility should be verified for your specific system.

What is the NSN for MIL-L-52087?

MIL-L-52087 is cataloged in the U.S. Government catalog under NSN 5342-00-542-3095. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MIL-L-52087 — CYLINDER ASSEMBLY,ACTUATING,LINE

Request a Quote — MIL-L-52087