PartsTable
Technical Data Sheet
Download PDF

MIL-H-7195 — CONE,RELEASING PARACHUTE PACK

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

MIL-H-7195: CONE,RELEASING PARACHUTE PACK.

The CONE,RELEASING PARACHUTE PACK is a the manufacturer industrial component. Key specifications include end_item_identification: A/F-18 AIRCRAFT. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-094-8004, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ MIL-H-7195
NSN: 5340-00-094-8004
NIINs: 000948004, 001166508, 004687072, 004911048, 007217099, 012634387, 014232444
FSC: 5340 — Hardware, Commercial
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
end_item_identificationA/F-18 AIRCRAFT
NSN5340-00-094-8004
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MIL-H-7195 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE WIDTH: 0.250 INCHES NOMINAL IN
•
UNATTACHED RING: NOT INCLUDED
•
INSIDE LENGTH: 1.813 INCHES NOMINAL IN
•
DESIGN TYPE: FIXED
•
END CONNECTION STYLE: LOOP
•
END POSITION: CONNECTION END AT RIGHT ANGLE TO PLANE OF HOOK END
•
HOOK STYLE DESIGNATOR: PIVOT
TECHNICAL CHARACTERISTICS
INSIDE WIDTH0.250 INCHES NOMINAL IN
UNATTACHED RINGNOT INCLUDED
INSIDE LENGTH1.813 INCHES NOMINAL IN
DESIGN TYPEFIXED
OVERALL LENGTH3.156 INCHES NOMINAL IN
END CONNECTION STYLELOOP
END POSITIONCONNECTION END AT RIGHT ANGLE TO PLANE OF HOOK END
HOOK STYLE DESIGNATORPIVOT
MATERIALSTEEL HOOK
RUBBER COVERED FEATURENOT INCLUDED
SUBSTITUTES & CROSS-REFERENCES 5
954082Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS22044-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AN6516-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
6516-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
PS22044-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MIL-H-7195?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-H-7195?
MIL-H-7195 is a CONE,RELEASING PARACHUTE PACK. It is classified as a MRO (MRO_GENERAL).
What parts can replace MIL-H-7195?
There are 5 known substitutes for MIL-H-7195: 954082, MS22044-1, AN6516-1 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-H-7195?
MIL-H-7195 is cataloged in the U.S. Government catalog under NSN 5340-00-094-8004. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-H-7195