PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-H-7061
MIL-H-7061 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 45.0 DEGREES FIRST END, flange_style: RECTANGULAR (INCLUDES SQUARE) SECOND END, flange_width: 3.000 INCHES NOMINAL SECOND END IN, thread_class: 2B FIRST END, flange_length: 3.000 INCHES NOMINAL SECOND END IN, connection_type: PLAIN FACE FLANGE SECOND END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-142-1087, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-H-7061
NSN: 4720-00-142-1087
FSC: 4720
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
flow_angle45.0 DEGREES FIRST END
flange_styleRECTANGULAR (INCLUDES SQUARE) SECOND END
flange_width3.000 INCHES NOMINAL SECOND END IN
thread_class2B FIRST END
flange_length3.000 INCHES NOMINAL SECOND END IN
connection_typePLAIN FACE FLANGE SECOND END
inside_diameter2.000 INCHES NOMINAL IN
connection_stylePLAIN SECOND END
outside_diameter2.906 INCHES NOMINAL IN
bolt_hole_diameter0.328 INCHES NOMINAL SECOND END IN
bolt_hole_quantity4 SECOND END
end_connection_designELBOW FIRST END
NSN4720-00-142-1087
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: MIL-H-7061 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON SINGLE RESPONSE
•
SPECIFICATION/STANDARD DATA: 81349-MIL-H-7061 GOVERNMENT SPECIFICATION
•
SPECIAL MARKINGS: W/RED STRIPE ALONG LG PARALLEL TO LONGITUDINAL AXIS AND MIL-H-7061,5/8 IN.ID IN
•
LAYER COMPOSITION AND LOCATION: OUTER LAYER MOLDED RUBBER, CHLOROPRENE
•
OUTER COVERING ENVIRONMENTAL PROTECTION: ABRASION RESISTANT AND FUEL RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND OIL RESISTANT AND OZONE RESISTANT AND WEATHERPROOF
•
MEASURING METHOD AND LENGTH: 480.000 INCHES MINIMUM OVERALL IN
•
MATERIAL: RUBBER SYNTHETIC TUBE
•
BURST TEST PRESSURE: 400.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
TECHNICAL CHARACTERISTICS (FLIS)
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON SINGLE RESPONSE
SPECIFICATION/STANDARD DATA81349-MIL-H-7061 GOVERNMENT SPECIFICATION
SPECIAL MARKINGSW/RED STRIPE ALONG LG PARALLEL TO LONGITUDINAL AXIS AND MIL-H-7061,5/8 IN.ID IN
LAYER COMPOSITION AND LOCATIONOUTER LAYER MOLDED RUBBER, CHLOROPRENE
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND FUEL RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND OIL RESISTANT AND OZONE RESISTANT AND WEATHERPROOF
MEASURING METHOD AND LENGTH480.000 INCHES MINIMUM OVERALL IN
MATERIALRUBBER SYNTHETIC TUBE
BURST TEST PRESSURE400.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
INSIDE DIAMETER0.625 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
MIL-H-7061Interchangeable
interchangeable cross-reference
interchangeable
4127510-26Interchangeable
interchangeable cross-reference
interchangeable
1810Interchangeable
interchangeable cross-reference
interchangeable
624-5Interchangeable
interchangeable cross-reference
interchangeable
CVC1810-10Interchangeable
interchangeable cross-reference
interchangeable
6600-48900Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-H-7061?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-H-7061?
MIL-H-7061 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace MIL-H-7061?
There are 17 known substitutes for MIL-H-7061: MIL-H-7061, 4127510-26, 1810 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-H-7061?
MIL-H-7061 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-142-1087. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-H-7061

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026