PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-H-24136/3-20
MIL-H-24136/3-20 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The MIL-H-24136/3-20 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-187-4283, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-H-24136/3-20
NSN: 4720-00-187-4283
FSC: 4720
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberMIL-H-24136/3-20
NSN4720-00-187-4283
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: MIL-H-24136/3-20 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
OUTSIDE DIAMETER: 1.500 INCHES NOMINAL IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER
•
MINIMUM INSIDE BENDING RADIUS: 9.000 INCHES IN
•
BURST TEST PRESSURE: 1800.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
INSIDE SURFACE CONDITION: SMOOTH
•
OUTER COVERING ENVIRONMENTAL PROTECTION: ABRASION RESISTANT AND OXIDATION RESISTANT AND WEATHERPROOF
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONLOGISTICS SUPPORT VESSEL (LSV)
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
OUTSIDE DIAMETER1.500 INCHES NOMINAL IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER
MINIMUM INSIDE BENDING RADIUS9.000 INCHES IN
BURST TEST PRESSURE1800.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
INSIDE SURFACE CONDITIONSMOOTH
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND OXIDATION RESISTANT AND WEATHERPROOF
MATERIALRUBBER SYNTHETIC TUBE
NONDEFINITIVE SPEC/STD DATA20 SIZE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
428020Interchangeable
interchangeable cross-reference
interchangeable
265320Interchangeable
interchangeable cross-reference
interchangeable
LT1084CKKInterchangeable
interchangeable cross-reference
interchangeable
LT1084CPInterchangeable
interchangeable cross-reference
interchangeable
25-8020Interchangeable
interchangeable cross-reference
interchangeable
1375977Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-H-24136/3-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-H-24136/3-20?
MIL-H-24136/3-20 is a MIL-H-24136/3-20.
What parts can replace MIL-H-24136/3-20?
There are 19 known substitutes for MIL-H-24136/3-20: 428020, 265320, LT1084CKK and 16 more. Substitute compatibility should be verified for your specific system.
Is MIL-H-24136/3-20 still available?
MIL-H-24136/3-20 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-H-24136/3-20

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026