Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW
The LEVELING ARM WELDMENT is a the manufacturer industrial component. Key specifications include material: PLASTIC, POLYETHYLENE (PP) TUBE, temp_rating: -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF, exterior_color: BLUE, inside_diameter: 0.500 INCHES NOMINAL IN, outside_diameter: 0.970 INCHES NOMINAL IN, features_provided: NONSKIVE. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-722-4724, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MIL-H-24135/13
NSN:4720-00-722-4724 FSC:4720 CAGE:81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
material
PLASTIC, POLYETHYLENE (PP) TUBE
temp_rating
-40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
exterior_color
BLUE
inside_diameter
0.500 INCHES NOMINAL IN
outside_diameter
0.970 INCHES NOMINAL IN
features_provided
NONSKIVE
operating_pressure
4250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure
14000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
inside_surface_condition
SMOOTH
hydrostatic_test_pressure
4500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
cross-sectional_shape_style
ROUND
specification/standard_data
81343-SAE J517,100R2A PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN
4720-00-722-4724
COMPONENT DIAGRAM
KEY FEATURES
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED POLYURETHANE
•
TEMP RATING: -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
OUTSIDE DIAMETER: 2.000 INCHES NOMINAL IN
•
FEATURES PROVIDED: NONSKIVE
•
EXTERIOR COLOR: BLUE
•
MINIMUM INSIDE BENDING RADIUS: 16.500 INCHES IN
•
BURST TEST PRESSURE: 6500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
HYDROSTATIC TEST PRESSURE: 4500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
TECHNICAL CHARACTERISTICS (FLIS)
LAYER COMPOSITION AND LOCATION
1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED POLYURETHANE
TEMP RATING
-40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
OUTSIDE DIAMETER
2.000 INCHES NOMINAL IN
FEATURES PROVIDED
NONSKIVE
EXTERIOR COLOR
BLUE
MINIMUM INSIDE BENDING RADIUS
16.500 INCHES IN
BURST TEST PRESSURE
6500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
HYDROSTATIC TEST PRESSURE
4500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
MATERIAL
PLASTIC, POLYETHYLENE (PP) TUBE
SPECIFICATION/STANDARD DATA
81343-SAE 7517,100R2A PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-H-24135/13?
MIL-H-24135/13 is a LEVELING ARM WELDMENT.
What parts can replace MIL-H-24135/13?
There are 27 known substitutes for MIL-H-24135/13: 72-6970-574, 22220CJW33, RS22220 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-H-24135/13?
MIL-H-24135/13 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-722-4724. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.