PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-H-22240 M22
MIL-H-22240 M22 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC TUBE, inside_diameter: 2.500 INCHES NOMINAL IN, outside_diameter: 3.124 INCHES NOMINAL IN, burst_test_pressure: 600.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS, inside_surface_condition: SMOOTH, media_for_which_designed: FUEL/OIL, HYDROCARBON AND WATER SINGLE RESPONSE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-151-5619, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-H-22240 M22
NSN: 4720-01-151-5619
FSC: 4720
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialRUBBER SYNTHETIC TUBE
inside_diameter2.500 INCHES NOMINAL IN
outside_diameter3.124 INCHES NOMINAL IN
burst_test_pressure600.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
inside_surface_conditionSMOOTH
media_for_which_designedFUEL/OIL, HYDROCARBON AND WATER SINGLE RESPONSE
hydrostatic_test_pressure300.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
cross-sectional_shape_styleROUND
measuring_method_and_length420.000 INCHES NOMINAL OVERALL IN
specification/standard_data81349-MIL-H-22240 GOVERNMENT SPECIFICATION
layer_composition_and_location1ST LAYER BRAIDED FABRIC AND 2ND LAYER BRAIDED FABRIC AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
outer_covering_environmental_protectionOZONE RESISTANT AND WATER RESISTANT
NSN4720-01-151-5619
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: MIL-H-22240 M22 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HYDROSTATIC TEST PRESSURE: 300.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
INSIDE DIAMETER: 2.500 INCHES NOMINAL IN
•
MEASURING METHOD AND LENGTH: 420.000 INCHES NOMINAL OVERALL IN
•
BURST TEST PRESSURE: 600.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
INSIDE SURFACE CONDITION: SMOOTH
•
OUTER COVERING ENVIRONMENTAL PROTECTION: OZONE RESISTANT AND WATER RESISTANT
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED FABRIC AND 2ND LAYER BRAIDED FABRIC AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
HYDROSTATIC TEST PRESSURE300.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
CROSS-SECTIONAL SHAPE STYLEROUND
INSIDE DIAMETER2.500 INCHES NOMINAL IN
MEASURING METHOD AND LENGTH420.000 INCHES NOMINAL OVERALL IN
BURST TEST PRESSURE600.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
INSIDE SURFACE CONDITIONSMOOTH
OUTER COVERING ENVIRONMENTAL PROTECTIONOZONE RESISTANT AND WATER RESISTANT
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED FABRIC AND 2ND LAYER BRAIDED FABRIC AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
MATERIALRUBBER SYNTHETIC TUBE
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON AND WATER SINGLE RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
2560-64Interchangeable
interchangeable cross-reference
interchangeable
MILH22240-4INIDInterchangeable
interchangeable cross-reference
interchangeable
H0S-22240-6A-420LInterchangeable
interchangeable cross-reference
interchangeable
2560-96Interchangeable
interchangeable cross-reference
interchangeable
MIL-H-22240Interchangeable
interchangeable cross-reference
interchangeable
H0S-22240-7A-420LInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-H-22240 M22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-H-22240 M22?
MIL-H-22240 M22 is a HOSE,NONMETALLIC.
What parts can replace MIL-H-22240 M22?
There are 12 known substitutes for MIL-H-22240 M22: 2560-64, MILH22240-4INID, H0S-22240-6A-420L and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-H-22240 M22?
MIL-H-22240 M22 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-151-5619. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-H-22240 M22

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026