PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-H-13444 TYPE 3
MIL-H-13444 TYPE 3 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include temp_rating: -55.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF, inside_diameter: 0.313 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN, outside_diameter: 0.597 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, operating_pressure: 1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS, burst_test_pressure: 4000.0 POUNDS PER SQUARE INCH LBS, inside_surface_condition: SMOOTH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-133-7365, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-H-13444 TYPE 3
NSN: 4720-01-133-7365
FSC: 4720
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
temp_rating-55.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
inside_diameter0.313 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
outside_diameter0.597 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
operating_pressure1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure4000.0 POUNDS PER SQUARE INCH LBS
inside_surface_conditionSMOOTH
media_for_which_designedFUEL/OIL, HYDROCARBON SINGLE RESPONSE
hydrostatic_test_pressure2000.0 POUNDS PER SQUARE INCH LBS
cross-sectional_shape_styleROUND
nondefinitive_spec/std_data3 TYPE
specification/standard_data81349-MIL-H-13444E GOVERNMENT SPECIFICATION
minimum_inside_bending_radius1.250 INCHES IN
NSN4720-01-133-7365
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: MIL-H-13444 TYPE 3 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
GM16121Interchangeable
interchangeable cross-reference
interchangeable
24312Interchangeable
interchangeable cross-reference
interchangeable
EE6-1Interchangeable
interchangeable cross-reference
interchangeable
1896Interchangeable
Microsoft Stylus Pen For Surface
interchangeable
55172Interchangeable
interchangeable cross-reference
interchangeable
243-6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-H-13444 TYPE 3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-H-13444 TYPE 3?
MIL-H-13444 TYPE 3 is a BEARING,ROLLER,NEEDLE.
What parts can replace MIL-H-13444 TYPE 3?
There are 8 known substitutes for MIL-H-13444 TYPE 3: GM16121, 24312, EE6-1 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-H-13444 TYPE 3?
MIL-H-13444 TYPE 3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-133-7365. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-H-13444 TYPE 3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026